car audio amps

[bob 351]

check out all these amps on ebay and tell me what you think
http://search.ebay.com.au/car-amp_W0...3aTB2Q3aAUQ3a2

[Matty4]

What??? You want an opinion on 127 different amps???
1. POS
2. POS
3. ..........
etc, etc,..

LOL............................ :nutsycuck

[bob 351]

Originally Posted by Matty4

What??? You want an opinion on 127 different amps???
1. POS
2. POS
3. ..........
etc, etc,..

LOL............................ :nutsycuck

well yes i do lol no realy just want to know if anybody has heard of or used any of this stuff because i cant believe the fact thatsome of these amps claim to be giving huge amount of wattage and some say they have mofset bits in them which i find pretty hard to believe considering some of the prises they are asking

[penrith_panther]

brands ive never heard of

[eb_5litre]

They may put out that much power.... but probably not for that very long.

[bob 351]

Originally Posted by eb_5litre

They may put out that much power.... but probably not for that very long.

do you think there would be fireworks in da boot lol

[eb_5litre]

Nah they usually just go "POP"

[bob 351]

Originally Posted by eb_5litre

Nah they usually just go "POP"

ok i'll keep saving love my music loud 4x50 watts out of the kenwood head unit dont cut it for me exspecialy trying to run 250 watt 3 ways up the back and 150 watt 3 ways up the front and i want a doof doof in the back as well

[Tribal]

Just a reference when looking at amps - look for S/N (signal to noise) > 95dB and also RMS ratings not peak power - I haven't got a clue about brands, but this is what I'd look at first. Power ratings on some of these amps tells you how much it uses - not what it puts out...If you have ever sat next to a guitarist with a 50w marshall amp you'll see that these are a little over rated. The Response 100WRMS amp looked good.

[eb_5litre]

If your on a tight budget you cant go past the Jaycar Response range.

[bob 351]

Originally Posted by eb_5litre

If your on a tight budget you cant go past the Jaycar Response range.

who deals in them i am in vic dont forget

[Tribal]

http://www.jaycar.com.au/stores.asp

[bob 351]

Originally Posted by Tribal

http://www.jaycar.com.au/stores.asp

i thank you kind sir now it's of to bed for me before i turn into a pumpkin

[kiwikid10]

yup those are amps alright.

Yes they are mosfet just not good mosfet.
Your Kenwood unit does not make 4 x 50W (you have been fooled by the marketing)

Really unless it says (Alpine,Pioneer,Kenwood,Clarion,MTX,Infinity etc you get my drift) you are buying junk.
If you can't afford good new gear buy good second hand stuff, in fact the older stuff out performs the newer stuff, old school rockford amp's still rock.

The stuff you listed should only be used as boat anchors.

[bob 351]

Originally Posted by kiwikid10

yup those are amps alright.

Yes they are mosfet just not good mosfet.
Your Kenwood unit does not make 4 x 50W (you have been fooled by the marketing)

Really unless it says (Alpine,Pioneer,Kenwood,Clarion,MTX,Infinity etc you get my drift) you are buying junk.
If you can't afford good new gear buy good second hand stuff, in fact the older stuff out performs the newer stuff, old school rockford amp's still rock.

The stuff you listed should only be used as boat anchors.

yea whatever kenwood kdc mp 6533 power 4x50 that is what i bought
4x50 is what it is rated at how can you say that it is not 50 watt's

[kiwikid10]

The numbers quoted by manufacturers are like peak power outputs on engines.
You never drive around using peak torque or Kw at 1/2 throttle at low revs do you?
Not ment to be offensive but this is one of my pet hates from car audio manufacturers and salesmen who "fool" the public into these big 50W headunits. I have been involved with car audio for 10+ years and it always happens.
You only get there by having the volume at full with maximum distortion, in reality the unit is really making about 18W RMS as oppose to the max quoted figure of 50W RMS this is a common trick that they use to make their units seem better than the opposition. If they were really 50W RMS then you would not need an amplifier, but in reality a 50W RMS amp will make a huge difference to your 50W PMP headunit.

[Tribal]

Yeah - definitely agree with you there - I used to play bass guitar in a band, and was using a 400WRMS Mesa Boogie tube amp (weighed about 20Kg) with 2x15" + 4x10" speakers and you could feel it kick you in the chest - so when you see car amps advertised saying 500W+ you know it aint right. Just comes down to marketing and bragging rights.

[bob 351]

well then i'm ****eed of then should i go and trow it back at the place i bought at and ask for my money back as it cost $449 retail

[Sorted]

Originally Posted by bob 351

well then i'm ****eed of then should i go and trow it back at the place i bought at and ask for my money back as it cost $449 retail

If you have it at full volume then you may get your 4x50watts

BUT if you bought a 4x50watt amp and hooked that up to your speakers you will hear what 50watts RMS is not 50watts PEAK

[eb_5litre]

No need to take it back mate, I think the majority of headunits are around 4x50 arent they?
Whatever the actual figure is its definately enough for the everyday joe, if you need more then buy an amp..... thats better in the long run anyway.

[bob 351]

ok amp time