BA XT Upgraded Brakes

[1LOUDXFUTE]

hey mate,

Do you do any kits that allow me to use my stock calipers on bigger rotors?

I have a BA2 XT.

Ryan

[JOHNNOSF6]

Stock calipers have a fixed bracket, the bracket and caliper are 1 piece & can't use larger rotors at all.

[1LOUDXFUTE]

ah that sucks... thanks johnno

[FLOORED]

Originally Posted by 1LOUDXFUTE

hey mate,

Do you do any kits that allow me to use my stock calipers on bigger rotors?

I have a BA2 XT.

Ryan

We don't do one but there has been one getting around that supplies you the brackets and rotors to do it.

[1LOUDXFUTE]

yeah i thought id heard of someone doing it.. in your opinion would this even be able to be done safely?

what would a kit something like the XR Premium brake upgrade set me back?

[JOHNNOSF6]

:

[1LOUDXFUTE]

Originally Posted by JOHNNOSF6

:

?? whats that for mate

[JOHNNOSF6]

Running a spacer on the brake caliper bracket's, would never have thought anyone was silly enought to try this let alone sell a kit. An engineer will never consider passing this. Not knocking you at all, just the clowns who are trying to sell it.

[FLOORED]

Originally Posted by JOHNNOSF6

Running a spacer on the brake caliper bracket's, would never have thought anyone was silly enought to try this let alone sell a kit. An engineer will never consider passing this. Not knocking you at all, just the clowns who are trying to sell it.

Could it be possible you are misinterpreting what is happening here ? The majority of big brake kits on cars have a bracket that adapts the caliper to the stub axle eg: Ford GTP etc with Brembo calipers fitted.Lug mounted calipers and radial mounted calipers in most cases can't be fitted to larger diameter rotors unless a bracket is supplied.

1LOUDXFUTE yeah i thought id heard of someone doing it.. in your opinion would this even be able to be done safely?
what would a kit something like the XR Premium brake upgrade set me back?

A common upgrade for a BA is to run the BF XR8 front brakes which has a 322mm rotor and a similar caliper to the one you have now.
322mm slotted DBA4000 rotors
PBR Twin pot calipers and pads
Braided lines
= $1100 or we can do it cheaper with no lines and rda rotors.

[JOHNNOSF6]

Originally Posted by FLOORED

Could it be possible you are misinterpreting what is happening here ? The majority of big brake kits on cars have a bracket that adapts the caliper to the stub axle eg: Ford GTP etc with Brembo calipers fitted.Lug mounted calipers and radial mounted calipers in most cases can't be fitted to larger diameter rotors unless a bracket is supplied.

Possibly.

You'd need to run a spacer between the hub and original caliper mount correct, so you'll have a bracket attached to the hub that is then attached to the calliper/bracket. Is this correct or am i looking at it wrong.

I know when i put the AP's on my last monaro i switched to a larger discs and fitted a 15mm spacer between the top of the bracket and the caliper, i got dragged over the pits for a non engineered blower and they nailed me for the spacers. I couldnt find an engineer anywhere that would sign there name to it.

[FLOORED]

Originally Posted by JOHNNOSF6

Possibly.

You'd need to run a spacer between the hub and original caliper mount correct, so you'll have a bracket attached to the hub that is then attached to the calliper/bracket. Is this correct or am i looking at it wrong.

I know when i put the AP's on my last monaro i switched to a larger discs and fitted a 15mm spacer between the top of the bracket and the caliper, i got dragged over the pits for a non engineered blower and they nailed me for the spacers. I couldnt find an engineer anywhere that would sign there name to it.

1.What you say is correct.A custom bracket will mount to the original caliper mount holes on the stub axle and then the caliper mounts to to the bracket.
2.I am guessing these were radial mounted calipers and the only reason you got pinged was because you ran some spacers between the bracket and caliper but if you had a proper bracket made to clear the larger rotor i reckon you may not of had the issue.
I am proud to say that we have never supplied a brake kit that has not passed an engineers report.