|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
18-10-2006, 01:42 PM | #1 | ||
:D:D
Join Date: Jul 2006
Location: Werribee
Posts: 913
|
hi peeps
on my AU when i go to lock the car with the control the lock goes down then comes up again and then it lets the horn go off but when i do it with the key it locks fine and unlocks fine with the key but when i use the control to unlock it all the doors are unlock except the drivers door any ideas. |
||
18-10-2006, 01:44 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: May 2006
Location: Perth, South
Posts: 3,064
|
lock it with the key, then go around and pull on each of the door handles, one of the actuators will be the problem, whichever door opens that will be the one....unless more than one does lol...apparently they're pretty easy to replace, i don't know, i've never had to do it before...
|
||
18-10-2006, 01:49 PM | #3 | ||
:D:D
Join Date: Jul 2006
Location: Werribee
Posts: 913
|
yer ive done that its the drivers door that opens. but the mechanizm has a funny sound to it its not normal.
|
||
18-10-2006, 01:52 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: May 2006
Location: Perth, South
Posts: 3,064
|
that's the broken one then, you need to replace that one and it will be ok
|
||
18-10-2006, 03:11 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: Belmont, WA
Posts: 1,301
|
Take the trim off and you will need a spline bit to pull the lock out, it's a really simple job
The drivers one is a bite more compllicated than the others due to the key & button. |
||
18-10-2006, 05:53 PM | #6 | ||
Regular Member
Join Date: Oct 2005
Posts: 39
|
You need a set of torx bits i think. Also i think the wiring changes with the AU lock actuator but whichever spare parts you buy it from will probably let you know. And supply you with the new wiring kit.
Anthony |
||