|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
14-06-2007, 09:25 PM
|
#1 | ||
|
www.TUFFCARPARTS.com
Join Date: Feb 2006
Posts: 5,221
|
Hi All,
Getting someone to fit my extractors for me, but they seem to think you need to know the torque reading for the exhaust bolts to the head. I'm pretty much positive, you just tighten up as much as you can (it's not like it's a head gasket or anything), but can anyone confirm or deny this either way? When I bolted my last set of extractors on myself, this is all I did (ie just did them as tight as possible, no torque readings...), and the car was fine.... By the way, it's Pacemaker 4499's going onto an I6. Thanks, Justin.
__________________
http://i1233.photobucket.com/albums/...psc203b7b1.jpg |
||
|
|
|
14-06-2007, 09:31 PM
|
#2 | ||
|
they call me Tibbo
Join Date: Dec 2004
Location: Brisbane
Posts: 6,163
|
nope just tight works for me
__________________
|
||
|
|
|
|
14-06-2007, 09:34 PM
|
#3 | ||
|
Hmmmmm Mulberry....
Join Date: May 2005
Location: Mornington Peninsula
Posts: 1,439
|
It would be impossible for me to get a torqe wrench on 1/2 of mine.
Tight is good |
||
|
|
|
|
14-06-2007, 09:34 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 2,256
|
lol @ torque wrench.. If you happen to use one, set it to FT.
|
||
|
|
|
|
14-06-2007, 09:36 PM
|
#5 | ||
|
www.TUFFCARPARTS.com
Join Date: Feb 2006
Posts: 5,221
|
Thanks guys - exactly what I would've thought.
I'm starting to get a bit worried now, as this guy's apparently a mechanic, but he's asking some pretty strange questions.... Basically he's after some parts I've got, and he hapenned to mention he's a mechanic, so we made a deal - my parts for his time!
__________________
http://i1233.photobucket.com/albums/...psc203b7b1.jpg |
||
|
|
|
|
14-06-2007, 09:36 PM
|
#6 | |||
|
www.TUFFCARPARTS.com
Join Date: Feb 2006
Posts: 5,221
|
Quote:
__________________
http://i1233.photobucket.com/albums/...psc203b7b1.jpg |
|||
|
|
|
|
14-06-2007, 11:26 PM
|
#7 | ||
|
Sly like a G6
Join Date: Jun 2006
Location: Hunter Valley Whine Country
Posts: 1,808
|
There is a spec in the ws manual, I just don't have it handy ATM. Not much use though if you can only get to 9 bolts with the tq wrench and have to use a ring spanner for the other 3...
__________________
The Frankenfalcon... AU1.5 Wagon, BA brakes, AU2 booster, BA2 XR6T engine, stock from airbox to turbo, 8psi/98 octane tune 240RWKW, BF XR6T cat, quiet 3" zorst, Pex BSO660 & BSO439 mufflers, 84 db, built BTR box, 3.08 LSD, Emer SVI LPG, AU1 XR8 alloys, Momo wheel, JVC KDR746BT head unit, Aerpro steering wheel control wiring. Sleeper, anyone? |
||
|
|
|
|
14-06-2007, 11:26 PM
|
#8 | ||
|
Kick out tha Jams
Join Date: Mar 2006
Location: SA
Posts: 443
|
theres torque ratings in the manual for pretty much any bolt that goes into the head or block. you dont want to snap a bolt off in the head by going too tight!
__________________
$416.80.......All that cash came from a new (used) car. Check your back seats! |
||
|
|
|
|
14-06-2007, 11:33 PM
|
#9 | ||
|
FG XR6 Ute & Sedan
 Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,524
|
I have always used a torque wrench on mine on all my cars.
__________________
regards Blue |
||
|
|
|
|
14-06-2007, 11:39 PM
|
#10 | ||
|
www.TUFFCARPARTS.com
Join Date: Feb 2006
Posts: 5,221
|
Well there you go! I might go eat some of the humble pie I just cooked up!
Would anyone happen to know then what the correct torque reading should be?
__________________
http://i1233.photobucket.com/albums/...psc203b7b1.jpg |
||
|
|
|
|
14-06-2007, 11:41 PM
|
#11 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Perth, South
Posts: 3,064
|
i just did mine up tight, you'd really have to be trying to snap one of the bolts off....
|
||
|
|
|
|
15-06-2007, 03:05 PM
|
#12 | ||
|
Banned
Join Date: May 2007
Posts: 389
|
Dont worry about torquing it up if the ****s not tight enough and it leaks id assume youd notice lmao
|
||
|
|
|
|
15-06-2007, 03:26 PM
|
#13 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
The correct torque is 27Nm but i doubt many people bother
|
||
|
|
|
|
15-06-2007, 04:22 PM
|
#14 | ||
|
!!
Join Date: Sep 2005
Posts: 433
|
There has to be a torque setting for every bolt on the vehicle
I just dont know how you can get to some bolts with a torque wrench |
||
|
|
|
|
15-06-2007, 08:59 PM
|
#15 | |||
|
Boost Addict
Join Date: Jan 2005
Location: North Brisbane
Posts: 1,151
|
Quote:
__________________
N12 Pulsar - sold Gen1 Liberty Turbo - sold VP Commodore Turbo - sold LN65 Hilux Turbo - sold EL31 Corolla Turbo - sold Ford AU Ute Turbo - sold Ford AU XR8 Sedan - 5.4l V8 Turbo (in the build) Ford BA XR6T Ute - daily driver Ford FG XR6T Sedan - cruiser do you see a general trend? I DO  Can't live with it, can't live without it! |
|||
|
|
|
|
15-06-2007, 09:22 PM
|
#16 | ||
|
www.TUFFCARPARTS.com
Join Date: Feb 2006
Posts: 5,221
|
See, I'd never heard of exhaust bolts having to be torqued up before. I wonder if any exhaust shops even do this.
__________________
http://i1233.photobucket.com/albums/...psc203b7b1.jpg |
||
|
|
|
|
15-06-2007, 10:54 PM
|
#17 | ||
|
Karasu
Join Date: May 2005
Location: Melbourne Vic
Posts: 208
|
Just do em up till the heads snap off then back them off 1/4 turn... always worked for my old man
|
||
|
|
|
Bolting on extractors - is a torque wrench required?
Linear Mode
