|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
16-11-2008, 09:39 PM
|
#1 | ||
|
Regular Member
Join Date: Oct 2008
Posts: 75
|
Hey guys,
This weekend i decided to change the lights on my instrument cluster as one had blown and figured while i have it all out i'll change them all, but i have since developed a slight problem, well problems actually. First when i start my can and turn it of my speedo needle 'bounces' at the bottem against the facier plate. Secondly my speedo is out by 10km/h i.e reads 60km/h but GPS shows 70km/h So my question is how do i fix these problems? will a recalibration do it? if so how can i do it or where can i get it done in Melbourne (north or west suburbs) thanks guys John |
||
|
|
|
16-11-2008, 09:43 PM
|
#2 | ||
|
The Monty
Join Date: Oct 2007
Location: Geelong
Posts: 1,226
|
it means when u put the needles back on after changing the globes u didnt take notice of where they were exactly sitting and put them back in to far down
a recalibration will fix it, that take it off and measure it and stuff, not sure where in melb tho |
||
|
|
|
|
16-11-2008, 09:55 PM
|
#3 | |||
|
Regular Member
Join Date: Oct 2008
Posts: 75
|
Quote:
Would ford service department do it? |
|||
|
|
|
Speedo problems
Linear Mode
