USB port

Franco Cozzo · 03-09-2009, 04:38 PM

Is there any way to get the USB port that comes on the Zetec WS into a CL model? I assume the stereo is all the same over the entire range, just missing the port and the wiring is behind the panel?

Thanks much.

JClarke · 04-09-2009, 09:36 AM

I believe that the USB is only available for the Zetec model, not the CL. Also, I am not sure if this is true, tampering the stero isn't a good idea. 'It cannot be removed or stolen'

Franco Cozzo · 04-09-2009, 08:52 PM

Quote:

Originally Posted by JClarke_Fiesta

I believe that the USB is only available for the Zetec model, not the CL. Also, I am not sure if this is true, tampering the stero isn't a good idea. 'It cannot be removed or stolen'

Yeah, but it has to be the same thing in the end, there must be a way to wire in the USB support unless the stereo itself is completely different.

dannyhilton · 04-09-2009, 09:26 PM

Have a look at the Europiean Fiesta pages, there should be some explanations there.