|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
27-10-2010, 06:29 PM | #31 | |||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: The Shakey Isles
Posts: 3,428
|
Quote:
|
|||
27-10-2010, 06:31 PM | #32 | |||
Regular Member
Join Date: Oct 2010
Posts: 205
|
Quote:
The US market was around 15 to 20 million now it's around 10 million pushing a barrow up a hill in a head wind on a lucky day. |
|||
27-10-2010, 06:41 PM | #33 | |||
IWCMOGTVM Club Supporter
Join Date: Sep 2005
Location: Northern Suburbs Melbourne
Posts: 17,799
|
Quote:
__________________
Daniel |
|||
27-10-2010, 06:47 PM | #34 | ||
FF.Com.Au Hardcore
Join Date: Jan 2009
Posts: 2,653
|
That is now good news for Aust.. Hope this new guy knows what his doing!!
|
||
27-10-2010, 06:48 PM | #35 | |||
Render unto Caesar
Join Date: Feb 2008
Location: ::1
Posts: 4,236
|
Quote:
If Ford world wide (don't forget Ford OZ is a pimple on the butt of the Ford global operation) are to survive they need to trim up the company, cut the waste and streamline models. If they don't they'll end up like GM. Chrysler is doing the same at the moment under the guidance of Fiat and they're up coming models are far better than anything in the past. Nissan has teamed up with other makes to consolidate the costs of developing platforms. It all comes down to cost, we as consumers want more for less and in such a competative market costs need to be reduced. I personally am looking forward to seeing the result of One Ford. Too many here are short sighted and cannot see the bigger picture. Ford is on the up and the changes made so far may not impress a few here (no real bad news anyway) but if they can sell a whole lore more cars and make a whole lot more money meaning they stay in business a lot longer, I can't see the problem.
__________________
"Aliens might be surprised to learn that in a cosmos with limitless starlight, humans kill for energy sources buried in sand." - Neil deGrasse Tyson |
|||
27-10-2010, 06:50 PM | #36 | |||
Regular Member
Join Date: Oct 2010
Posts: 205
|
Quote:
The wagon got cut because less than 150 got sold per month, you can't really expect to keep building a wagon that is only selling 1800 vehicles in a good year, usually it's far less than that. the end of the V6 will be due to the people running around like mad chickens whinging about how there isn't enough oxygen even though you only use 6% oxygen per breath, and breathe in more nitrogen than anything. Also the USA is changing it's emission targets and also have started doing paper on having mission requirements on heavy diesel trucks etc even though diesel is cleaner than petrol by a long long shot. The cruze isn't a good car it has break down problems in the USA, but it's only here so GM is proped up while paying things off. I think it's a shame that ford australia isn't trying to export the falcon at least heaps of US people want it, as they only have the mustang as a rear wheel drive car and alll the oldie folks over there who don't want a mustang aren't buying any of the front wheel drive fords over there so ford will be missing out on some major sales, it's only the F-Truck that saves ford in the USA. I don't mind the marketing but what can you do some will like some won't simple as that. |
|||
27-10-2010, 07:02 PM | #37 | |||
Falcon RTV - FG G6ET
Join Date: Mar 2007
Location: In Da Bush, QLD
Posts: 31,842
|
Quote:
If I was FORD US Boss and saw this sort of performance in a market as mature and as old as this I would also take into account his previous success in Europe & take the tough decision of moving the man to the worlds largest emerging vehicle manufacturing market.
__________________
BAII RTV - with Raptor V S/C. RTV Power FG G6ET 50th Anniversary in Sensation. While the basic Ford Six was code named Barra, the Turbo version clearly deserved its very own moniker – again enter Gordon Barfield.
We asked him if the engine had actually been called “Seagull” and how that came about. “Actually it was just call “Gull”, because I named it that. Because we knew it was going to poo on everything”. |
|||
27-10-2010, 07:11 PM | #38 | |||
IWCMOGTVM Club Supporter
Join Date: Sep 2005
Location: Northern Suburbs Melbourne
Posts: 17,799
|
Quote:
In terms of Ford Australia I'm not so confident about this move. But you never know.
__________________
Daniel |
|||
27-10-2010, 07:29 PM | #39 | ||
Right out sideways
Join Date: Dec 2004
Location: Coffs Harbour NSW
Posts: 5,307
|
Hope he likes motorsport
__________________
2010 FG XR50 Turbo | 2007 FPV BFII GT, BOSS 302 |
||
27-10-2010, 07:39 PM | #40 | |||
Regular Member
Join Date: Oct 2010
Posts: 205
|
Quote:
Yes but that's not what I meant exactly. Say ford have 100 different models with 40 different chassis types under them. One ford is about dropping 35 of those chassis types to 5 types and then instead of 100 models they would drop to say 30 models all up for the world. what ones get dropped who knows, in terms of Australia being a small market and all, that could mean all the current Australian only models could be wiped in favour of US and European models by next year. Australia seems to be the design bed for the one ford chassis types the T6 chassis was designed and developed here yet won't be produced here. The next chassis type is a small car one that is due to be started before the end of the year also to be designed and developed as well but currently unlikly to be produced here either. I've been reading around on the net and people in the Australian car media are starting to ask ford if they will keep making the ford ute seeing as the T6/ranger is based and designed on a US F150 pick up truck for the global markets including Australia. Currently Ford Australia are saying yes but future plans can always change so unknown what will happen. Also many of fords US cars all all front wheel drive only, the Ford US cop car has failed pretty bad (front wheel drive) against the Holden export cop car (rear wheel drive) That might not mean much right now here, but it could after next year. Ford US are wanting more front wheel drive cars than rear wheel drive cars, I think the falcon is the only ford rear wheel drive car bar the mustang. Money wise Ford was is doing good, it was the only US car maker that didn't need US government bail out money, so currently any money they make now is theirs and don't need to pay back anyone. Nissan are a bit different back in the 80's and early 90's they made many of their own car designs, how ever since being owned by Renault and the bosses at Renault have put a major stop on that, they allowed the new Skyline to go ahead only because it would be a huge seller in all markets around the world but until then skyline's have never been sold outside of Japan. All the Skylines you see on the roads around the world, bar the newest one are all imports to that country. Anyway, I think many people can see the end of the falcon and the ute as you can buy it today. the next version of the falcon will probably be a V4 front wheel drive car with the upper version being powered by a turboed V4, and no V6 or V8 will exist. FPV could get wiped as it uses V6 and V8 motors and with no rear wheel chassis existing it'd be pointless keeping it around as it wouldn't be a viable competitor to HSV and Ford US wouldn't see the current FPV models complying with their Ford One project. While I won't mind having a US pick up and diesel too at that (brilliant for stupid amounts of power) but I don't think many Australian Ford fans will be into that. I actually think it'd be good to a point in that Ford probably do need to drop some models but I wouldn't be interested in buy Australian ford's that are front wheel drive cars just because some 16 year old can't stop crashing into trees etc in the USA. |
|||
27-10-2010, 08:12 PM | #41 | |||
Falcon RTV - FG G6ET
Join Date: Mar 2007
Location: In Da Bush, QLD
Posts: 31,842
|
Quote:
__________________
BAII RTV - with Raptor V S/C. RTV Power FG G6ET 50th Anniversary in Sensation. While the basic Ford Six was code named Barra, the Turbo version clearly deserved its very own moniker – again enter Gordon Barfield.
We asked him if the engine had actually been called “Seagull” and how that came about. “Actually it was just call “Gull”, because I named it that. Because we knew it was going to poo on everything”. |
|||
27-10-2010, 08:20 PM | #42 | ||
Mustang GT mmmmmm......
Join Date: Jan 2006
Location: Mornington Peninsula
Posts: 1,459
|
So Ford Aus will be going on a new and different path, again.
Lets see what damage will be done this time by someone with no idea of what makes us tick out here. Think everyone here at Ford Forums could do a better job than of the past five years.
__________________
I have become a Mustanger. |
||
27-10-2010, 08:22 PM | #43 | ||
FF.Com.Au Hardcore
Join Date: Oct 2006
Location: Queensland
Posts: 1,801
|
Like most here, I'm gutted. I believe we were on the edge of something amazing at Ford Australia, but I think this could have a lot more to do with Alan Mullay than anyone. I believe his influence has been felt across all Ford branches around the globe. I'm deeply saddened to see Marin Burela go, it takes a while to see the changes come through in a position like his and I believe we were to see the best from him. However, as pointed out, Ford China is struggling, and someone as passionate as him should be put to good use in such a large market. We're small fry here.
Looking at the 'new guys' CV it doesn't scream of passion as such, but perhaps Ford Australia, with all us passionate Ford fans, well this could be the guys big break. It's hard not to be impressed by Ford Australia and its fans. With so many exciting new models there's no excuse for tardiness.
__________________
CURRENT: 2017 Escape Titanium 2.0L EcoBoost with Technology Pack in White Platinum PREVIOUS 2015 Fiesta ST / 2012 Focus Titanium / 2009 Fiesta Zetec / 2004 Fiesta Zetec |
||
27-10-2010, 09:02 PM | #44 | |||||||||
FGX XR8
Join Date: Jan 2008
Location: Melbourne
Posts: 702
|
Zagan I'd suggest having a bit of read around in the forums to understand where ford stand at the moment and where they're going into the future. some of the members on here are a wealth of knowledge but in regard to some of your statements i'll respond to the best of my knowledge. Anyone can feel free to correct me if i'm incorrect.
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
Quote:
|
|||||||||
27-10-2010, 09:11 PM | #45 | ||
FF.Com.Au Hardcore
Join Date: Jan 2010
Posts: 11,412
|
Sigh, here we go again.......
|
||
27-10-2010, 09:24 PM | #46 | |||
Pity the fool
Join Date: Jan 2007
Location: Wait Awhile
Posts: 8,997
|
Quote:
__________________
Fords I own or have owned: 1970 XW Falcon GT replica | 1970 XW Falcon | 1971 XY Fairmont | 1973 ZG Fairlane | 1986 XF Falcon panel van | 1987 XFII Falcon S-Pack | 1988 XF Falcon GLS ute | 1993 EBII Fairmont V8 | 1996 XG Falcon ute | 2000 AU Falcon wagon | 2004 BA Falcon XT | 2012 SZ Territory Titanium AWD Proud to buy Australian and support Ford Australia through thick and thin |
|||
27-10-2010, 09:36 PM | #47 | ||
The 'Stihl' Man
Join Date: Jan 2005
Location: TAS
Posts: 27,591
|
Bloody Hell..thats all I can say. Every muppet they put in tries to make a name for themselves and stuffs things up in the process...this is not what I thought id be reading for a while.
__________________
|
||
27-10-2010, 09:38 PM | #48 | |||||||||||
Render unto Caesar
Join Date: Feb 2008
Location: ::1
Posts: 4,236
|
Quote:
If they do cut it down like you say to 5 platforms and 30 models, that is still a fair chunk of range. Of the top of my head, Fiesta, Focus, Mondeo, Mustang, Falcon, Fseries, Taurus, Fusion and these are just the main models, don't forget all the others that can be spawned from them, i.e. from the Falcon platform (if it shares the mustang) the ute. However what i have stated is just speculation and I would rather wait for an official announcement. Quote:
Which small platform are you referring to? Have you got any documented sources? Quote:
The Ranger is sold here alongside the ute. The ute's future is based on the Falcon, if the Falcon remains then ute has a better chance. Simply put if the sales aren't there then why keep pouring millions of $$ they don't have into it? Quote:
FWD is a cost saving. Most consumers who buy them (hot hatches excepted) don't care which wheels are the driving force, they just want reliable transport. Just ask BMW who will be moving to a FWD platform for the next 1 series. Their customers didn't know it was RWD or cared. Quote:
Quote:
Quote:
V4? V6? Do you even know what Ford have? Quote:
Quote:
Your last statement is silly beyond anything. FWD cars were not brought in to stop 16 year olds from hitting trees, you can hit a tree in anything. I think you should spend some time researching the car industry, start with Ford motor company and their current line up. Know the products before trying (yet failing) to analyse what people want.
__________________
"Aliens might be surprised to learn that in a cosmos with limitless starlight, humans kill for energy sources buried in sand." - Neil deGrasse Tyson |
|||||||||||
27-10-2010, 09:47 PM | #49 | |||
You dig, we stick!
Join Date: Mar 2006
Posts: 7,461
|
Quote:
Ford China sold 315,000 cars, and it's the tip of the iceburg. Ford Australia sold a fraction of that for thanks to our population. So, if I were Mulally I'd do the same. Yes, we want him here, but for Ford there are bigger fish to fry. Ford Australia's direction has already been set. This new guy, welcome to him, will oversee these plans - not make new ones. If we're as blind to think that he has no idea of Ford Au's history and heritage then that is a massive under-estimation on out part; he's been with Ford before most here were born. Anyway, Ford Australia's future isn't about the Falcon and what it was in the past, I think we should accept that now. It's about Ford Australia's recognition in the Ford world as an engineering centre that will be the springboard of Falcon's global direction. There are no more "regions" as such where each country is working independently - we all know that. In other words having an outsider isn't the same as what it was like in the past. As long as Mulally's there, Ford is not off coarse (excuse the pun).
__________________
"....You don't put the car through engineering" - Rod Barrett. |
|||
27-10-2010, 10:12 PM | #50 | |||
Ford motor company
Join Date: Aug 2009
Location: Victoria
Posts: 791
|
Quote:
as with the rest of you its a shame hes going but in all seriousness does the CEO really have full control of the company? its like Australia's political mess, we all thought kevin rudd was the leader but some unknown faceless men boot the 'leader' is there 'faceless' executives within ford au? surely they'd have a big say in what happens i know every time we get a new CEO(which is alot ) plans always change but next year is a massive step in the right direction for ford so i highly doubt we will see dramatic changes within a year anyway, it'd be stupid to by 2012 we'll have another CEO anyway
__________________
The proud owner of an FG XR6T in DASH Manual, leather, and premium sound. Currently have chrome window surrounds, chrome boot garnish, DJR lip, slightly lowered and a home made air box with a K&N pod filter. WORK CAR: RED 1996 manual XG ute |
|||
27-10-2010, 10:22 PM | #51 | ||
Ford motor company
Join Date: Aug 2009
Location: Victoria
Posts: 791
|
Double post
__________________
The proud owner of an FG XR6T in DASH Manual, leather, and premium sound. Currently have chrome window surrounds, chrome boot garnish, DJR lip, slightly lowered and a home made air box with a K&N pod filter. WORK CAR: RED 1996 manual XG ute Last edited by sxckevo; 27-10-2010 at 10:24 PM. Reason: double post |
||
27-10-2010, 10:46 PM | #52 | |||
FF.Com.Au Hardcore
Join Date: Jan 2009
Posts: 2,653
|
Quote:
|
|||
28-10-2010, 03:54 AM | #53 | ||
FF.Com.Au Hardcore
Join Date: Aug 2005
Location: Utah
Posts: 3,479
|
Wow a leadership change for a company, and suddenly the sky is falling.
|
||
28-10-2010, 07:43 AM | #54 | ||
The 'Stihl' Man
Join Date: Jan 2005
Location: TAS
Posts: 27,591
|
Well at the end of the day as falcon said Australia is a stepping stone for CEOs, I just feel so used...lol
These guys don't really have a huge influence IMO except for persona in the media. The majority of decisions are made before they get to their desks. I'm sure he has a family, depending on the situation I'd go where the money was as well. It's the attitude and awareness of the market that worries me when the new guys come in. This guy is going to come in when arguably foa is at it's strongest with product and structure than it has been in a very long time.
__________________
|
||
28-10-2010, 10:13 AM | #55 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Posts: 2,504
|
There's a bigger picture here and most are not seeing it...
The news is not that bad imo. |
||
28-10-2010, 10:51 AM | #56 | |||
Powered by Marshall
Join Date: Jan 2005
Posts: 1,143
|
Quote:
Who knows, maybe even one day China may see a large platform headed there way with a designed in Oz sticker on it
__________________
Powered by Marshall |
|||
28-10-2010, 11:26 AM | #57 | |||
Pity the fool
Join Date: Jan 2007
Location: Wait Awhile
Posts: 8,997
|
Quote:
Maybe for not much longer.
__________________
Fords I own or have owned: 1970 XW Falcon GT replica | 1970 XW Falcon | 1971 XY Fairmont | 1973 ZG Fairlane | 1986 XF Falcon panel van | 1987 XFII Falcon S-Pack | 1988 XF Falcon GLS ute | 1993 EBII Fairmont V8 | 1996 XG Falcon ute | 2000 AU Falcon wagon | 2004 BA Falcon XT | 2012 SZ Territory Titanium AWD Proud to buy Australian and support Ford Australia through thick and thin |
|||
28-10-2010, 11:31 AM | #58 | ||||
^^^^^^^^
Join Date: Jan 2005
Location: online - duh
Posts: 9,642
|
Quote:
Cherry picking the new guys bio for a bit of optomism I find; Quote:
May not be all bad news IMHO.
__________________
. |
||||
28-10-2010, 12:12 PM | #59 | |||
FF.Com.Au Hardcore
Join Date: Jul 2009
Posts: 727
|
Quote:
Plus 1 ^^ - I totally agree, Ford's plans IMO do not revolve around one persons appointment - things are in motion and I believe it does not warrant the doom and gloom currently surrounding one appointment, currently looking forward to the next 12 - 18 months. |
|||
28-10-2010, 01:11 PM | #60 | ||
Compulsive Hobbiest
Join Date: May 2006
Location: Ohio, USA
Posts: 1,032
|
I'll try to remember what I want to comment on. Some have already responded to some posts with what I would have said in correction of the post.
Burela did not use Australia as a stepping stone. Ford decides someone is to go here or there, and they MUST go. If they are a team player on the Ford team they will go where they are told, or they will be gone, period. China IS part of Asia Pacific-Africa. Joe Hinrichs is President of Ford Asia Pacific-Africa, Robert Graziano is the CEO of Ford, China. Right in the article it says:"Ford’s Asia Pacific and Africa region encompasses markets on three continents, including Australia, China, India, Thailand and South Africa." I built the Mercury Villager minivan. At the time of the launch, which Graziano was in charge of, it was the BEST new vehicle launch Ford ever had. Perhaps that is one reason they moved him to Oz: ".....and the market launch of the all new Ford Ranger pickup truck, one of the most important new products of the global One Ford plan." Fords sales in China being behind the rest is due in LARGE part to their lack of manufacturing capacity. Over the past 12 months Ford has put $1.3 billion into their facilities to increase production capacity in order to pursue more market share. As for vehicle nameplates and how many there will be....."Since joining the company, just four years ago, Mulally has reduced the number of nameplates in the Ford stable from 97 to 37." In addition that that info........“there will be 25 to 30 nameplates associated with Ford covering the world.” Here's a link to that info...... http://www.thedetroitbureau.com/2010...meplate-count/ Steve
__________________
My Filmmaking Career Website Latest Project: Musclin' My XB Interceptor project Wife's 1966 Mustang My Artworks and Creative Projects Site Oil Paintings, Airbrushing, Metal Sculpture, Custom Cars, Replica Movie Props, Videos, and more! |
||