|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-06-2012, 12:24 PM
|
#1 | ||
|
Regular Member
Join Date: Sep 2010
Posts: 122
|
has anyone had to move there windscreen washer bottle from its factory location due to using the space to fit something else, ie Gas? if so, where did you move it to and what bottle did you use?
i have seen several aftermarket bottles fitted to a bracket that mounts to the throttle body but as this interfears with the fitting of the engine cover, and looks untidy, im looking for other suggestions. short of boot mounting it (which im not keen on) any ideas or better yet any pix of what they have done? |
||
|
|
|
11-06-2012, 08:37 PM
|
#2 | ||
|
Got Ghia?
Join Date: Jul 2006
Location: Perth
Posts: 999
|
Mines a rubber/plastic pouch near the factory location
__________________
2007 BF MKII Ghia V8 - BA GT Exhaust| F6 Intake | Superlows | 19" GT-P's | 30mm Swaybar | - Sold  2002 AU2 XR8 Ute - Manual | Leather | Injected LPG | Pacemakers |
||
|
|
|
|
12-06-2012, 10:08 PM
|
#3 | ||
|
Regular Member
Join Date: Sep 2010
Posts: 122
|
nice Gaz, i hadnt thought of that set up........
|
||
|
|
|
|
15-06-2012, 02:57 PM
|
#4 | ||
|
Regular Member
Join Date: Sep 2010
Posts: 122
|
this is what i want to change. where did you get the one on yours Gaz
|
||
|
|
|
|
15-06-2012, 11:30 PM
|
#5 | ||
|
Got Ghia?
Join Date: Jul 2006
Location: Perth
Posts: 999
|
No idea, previous owner did it with the conversion. Next time I open the bonnet I'll look for a part number or brand
__________________
2007 BF MKII Ghia V8 - BA GT Exhaust| F6 Intake | Superlows | 19" GT-P's | 30mm Swaybar | - Sold 2002 AU2 XR8 Ute - Manual | Leather | Injected LPG | Pacemakers |
||
|
|
|
|
16-06-2012, 09:10 AM
|
#6 | ||
|
Regular Member
Join Date: Sep 2010
Posts: 122
|
thanks mate.
|
||
|
|
|
Au Xr8 washer bottle re-location
Linear Mode
