|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
04-05-2015, 04:21 PM | #1 | ||
Regular Member
Join Date: Aug 2011
Posts: 38
|
Hey guys trying to check trans fluid on my kh laser 1.6l carby 3 speed auto. When cold oil shows up to full line. Take for quick 5 min drive, then put through all gears an back to park. I check then wipe clean bout 3 times over oil looks like just above low line but when i look closely it does go up to full line just very thin looking in between low and full. Which reading would be correct? Also is it hard to fit a trans filter kit?
|
||
04-05-2015, 09:14 PM | #2 | ||
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
tranny oil level is good
what was its colour/smell 1.6 motor trans filter kit has internal filter and a pan gasket so drop the pan .refill through the dipstick http://www.rycofilters.com.au/catalo...ASER/series/KH http://www.rycofilters.com.au/catalogue
__________________
My car goes Brumm Brumm |
||
04-05-2015, 09:51 PM | #3 | ||
Regular Member
Join Date: Aug 2011
Posts: 38
|
Thanks yeah 1.6 motor, oil is dark red
|
||
04-05-2015, 09:52 PM | #4 | ||
Regular Member
Join Date: Aug 2011
Posts: 38
|
Smell I'm not sure I'll have to get back to you when it's not dark
|
||