|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
31-10-2017, 01:38 PM
|
#1 | ||
|
Starter Motor
Join Date: May 2017
Posts: 16
|
Hi, I’m looking to mode to 4 wheel discs and 5 stud wheels,” and came across an XF diff. I understand the diff will need shortening, any other hiccups I might encounter? Thanks all
Sent from my iPhone using Tapatalk |
||
|
|
|
31-10-2017, 01:38 PM
|
#2 | ||
|
Starter Motor
Join Date: May 2017
Posts: 16
|
It was comple with disc brakes already.
Sent from my iPhone using Tapatalk |
||
|
|
|
|
31-10-2017, 05:31 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 5,466
|
Hi. Its easy to loose about 3 inches on a falcon diff, just run 2 L/H axles. If you need more you can take 3 inches out of the right side and use the L/H axle in that side and then shorten the left side to get the length you need and get the R/H shaft shortened to suit (ie: 3 inches plus what you shortened the tube by). Cheers MD
__________________
 HI  I'M MICHAEL  2003 ACID RUSH BA FUTURA WAGON  light up window switches | auto on cruise control | doubleclick window lift from remote |
||
|
|
|
|
31-10-2017, 07:12 PM
|
#4 | ||
|
Regular Member
Join Date: Jul 2013
Location: Sydney N.S.W
Posts: 431
|
Handbrake setup and I think my Capri runs an XE master cylinder and booster.
|
||
|
|
|
|
06-11-2017, 07:44 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Posts: 543
|
Use an el ute/wags diff
Theyre 28 spline and some come with 3.45 gears and lsd You can shorten them 95mm each side, the put the short axle in the long side and have 190mm cut off the long axle
__________________
GH Sigma EFI 351, 394whp @6500rpm |
||
|
|
|
XF diff MK1 Capri?
Linear Mode
