|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
07-10-2020, 09:22 AM
|
#1 | ||
|
Starter Motor
Join Date: Oct 2020
Posts: 4
|
Hi, my first post...I am thinking of getting a set of Gilmore drives for my 351, I have heard alot of negative feedback about how they destroy Alternators and so on, are they worth the coin or just another expensive shiney thing, that will probably do more damage than good in the long run.
Any feedback would be appreciated. |
||
|
|
|
07-10-2020, 10:16 AM
|
#2 | ||
|
Regular Member
Join Date: Dec 2005
Location: victoria
Posts: 141
|
isnt it gilmer?....
|
||
|
|
|
| 3 users like this post: |
|
07-10-2020, 10:45 AM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2005
Posts: 1,381
|
Happy Gilmore drives ?? (a golfing pun...)
|
||
|
|
|
| 2 users like this post: |
|
07-10-2020, 11:28 AM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2005
Posts: 1,212
|
I run one, I like the look but with my twin thermo fan setup I don't have much room.
__________________
Had EB XR8 AU XR8 220 (awsome car ) AU Fairmont BA MK2 XR6 Turbo Now XDUB |
||
|
|
|
|
07-10-2020, 08:51 PM
|
#5 | |||
|
FF.Com.Au Hardcore
Join Date: Feb 2008
Location: Perth, Northern Suburbs
Posts: 5,035
|
Quote:
Toothed belts can transfer a lot more torque with greatly reduced slippage, and they can multiply this effect by running much wider that your typical v-belt. As for claims of damage. If correctly balanced, and mounted, they shouldn't. In my experience, extraordinary damage to bearings is mostly caused by over-tensioning. Since toothed belts can run much less tension without slipping, that should not be an issue. Naturally, if you do over-tension a wide belt, the damage to the bearing is increased. I would suppose that it's also possible that if you mounted a disproportionately heavy toothed pulley on a lightweight bearing, then the simply effect of gravity could stress the bearing. But from what I have seen, they are mostly hollow alloy.
__________________
2024
Making Whine from the Tears of Hippies |
|||
|
|
|
| This user likes this post: |
|
09-10-2020, 01:36 PM
|
#6 | ||
|
Starter Motor
Join Date: Oct 2020
Posts: 4
|
Sorry it is GILMER Drive not Gilmore...That movie though.
|
||
|
|
|
|
09-10-2020, 01:53 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2008
Posts: 821
|
I ran a Gilmer belt on my clevo for 2yrs without incident and my alternator was at least 15yrs old.
The belt isn't tensioned any more tightly than the v Belt, so the strain on the bearing should not be much more. I loved the sound and it did make the engine bay nicer to look at. |
||
|
|
|
|
10-10-2020, 11:50 PM
|
#8 | ||
|
Bathed In A Yellow Glow
Join Date: Mar 2010
Location: NSW Central Coast
Posts: 2,530
|
I've had one on mine for near on ten years without any problems.
I do carry a couple of spare belts in the boot just in case but I've never needed them. . |
||
|
|
|
|
11-10-2020, 11:56 AM
|
#9 | ||
|
Banned
Join Date: Jan 2009
Posts: 1,621
|
this guy has a double charger set up, at 3.30 he talks about the belt, and that heat in the belt results in better belt tension. he has a gates belt, i don,t know if this is true for different brands.
https://www.youtube.com/watch?v=j2_oT56jVnM |
||
|
|
|
Gilmore Drives on 351
Linear Mode
