|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-07-2006, 05:39 PM
|
#1 | ||
|
ED 347 ..... hibernating
Join Date: Jul 2005
Location: Crimebourne
Posts: 264
|
g'day,
im putting an injected 250 crossflow out of an xf into my te cortina. would this require engineering as the te's didn't come from factory with an injected motor?? |
||
|
|
|
06-07-2006, 07:04 PM
|
#2 | ||
|
Regular Member
Join Date: Jan 2006
Location: perth
Posts: 461
|
is it registerd as a 6 cyl?
|
||
|
|
|
|
06-07-2006, 07:48 PM
|
#3 | ||
|
ED 347 ..... hibernating
Join Date: Jul 2005
Location: Crimebourne
Posts: 264
|
its not yet registered but i believe it was a factory 6....i bought it as a rolling shell.....i just wasn't sure if it would need to be engineered as they were carby 6's not fuel injected.
|
||
|
|
|
|
06-07-2006, 10:38 PM
|
#4 | ||
|
Regular Member
Join Date: Jan 2006
Location: perth
Posts: 461
|
yes it will.
|
||
|
|
|
|
23-07-2006, 08:34 PM
|
#5 | ||
|
want more inches STROKEIT
Join Date: May 2006
Location: Sydney
Posts: 162
|
Shouldn't have any engineering issues as brakes and master r the same 4 both but u will need to modify your heater box as the inlet tract on number 6 will foul the heater box and battery will need to be relocated to fit the air box.
|
||
|
|
|
|
24-07-2006, 08:46 PM
|
#6 | ||
|
Regular Member
Join Date: Jan 2006
Location: perth
Posts: 461
|
yes but it wasnt registerd as EFI
so it will need engernereing |
||
|
|
|
TE cortina 250 crossflow
Linear Mode
