Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 10-07-2006, 09:39 AM   #1
TheSneakiness
Adapt or perish...
 
TheSneakiness's Avatar
 
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
Default Headlight adjustment

Can you adjust headlights in an AU?

I was flashed by other morons all weekend who think my low beam are my high beam.

I do have the Phillips White Light globes in.

__________________
Carless
TheSneakiness is offline   Reply With Quote Multi-Quote with this Post
Old 10-07-2006, 09:46 AM   #2
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

Yes you can ... there are 2 adjustors on the back of the headlight.
The Dok had a great link on how to .... I think it was put in the Territory section.
I'll dig it up for you.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 10-07-2006, 09:47 AM   #3
TheSneakiness
Adapt or perish...
 
TheSneakiness's Avatar
 
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
Default

Thanks...
__________________
Carless
TheSneakiness is offline   Reply With Quote Multi-Quote with this Post
Old 10-07-2006, 09:47 AM   #4
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

Thanks to The Dok from The Headlight Hospital

http://www.fordforums.com.au/showpos...9&postcount=14
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 10-07-2006, 09:53 AM   #5
TheSneakiness
Adapt or perish...
 
TheSneakiness's Avatar
 
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
Default

According to that guide, I'm all good. I made sure of that when I put the new globes in.

Why people "high beam" me to dip my lights has me buggered. There's nothing wrong with the positioning of the lights, at the moment, I wait until they come right up to me, then flash 'em with the high beam, which are also Phillips White Light.

Yes, this does annoy me no end.
__________________
Carless
TheSneakiness is offline   Reply With Quote Multi-Quote with this Post
Old 10-07-2006, 10:00 AM   #6
Mechan1k
Moderator
Donating Member1
 
Mechan1k's Avatar
 
Join Date: Feb 2005
Location: Kenthurst
Posts: 40,403
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Brings a wealth of knowledge to the forums and is frequently giving helpful advice. Technical Contributor: For members who share their technical expertise. - Issue reason: Always willing to help out with technical information. 
Default

Yeah I had someone do it to me the other day ... and I am only using Narva Plus 50s. although I had just come over a crest ... and the top of the beam was over the driver's vision ... they decided to flash me late ... but I was ready for that .... and I got them back immediately before they passed me.

I don't think they'll try that one again to someone else.

My last glimpse of them was the entire interior lit up white ... and his right arm flicked up to cover his face ... I also notice him squint in pain as well).

Some driver's out there just cannot handle "normal headlight" and have a whinge about it ... even when you headlights are aligned correctly ... and they have to flash you for it ... it's these people that should be on the road at night in the first place.
Mechan1k is offline   Reply With Quote Multi-Quote with this Post
Old 10-07-2006, 10:46 AM   #7
JC
Miami Pilot
Donating Member2
 
JC's Avatar
 
Join Date: Jan 2005
Location: ACT
Posts: 21,703
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default

Quote:
Originally Posted by AUII_SE_Ute
Can you adjust headlights in an AU?

I was flashed by other morons all weekend who think my low beam are my high beam.

I do have the Phillips White Light globes in.
If you have superlows or lwer in the back of your car, the front may be sitting a little higher than the standard front/rear angle of the car from factory, which may be causing your headlights to point up slightly. Given that the AU has some of the best factory lighting in a modern car, the increased up angle (even though only slight) may be enough to cause dazzle to other drivers. I had this problem with my XR, and reinstalling the lows in the rear has sorted that problem. (Plus the tree tops no longer get lit up)
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb)
1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs).
Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s

Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings

FPV 335 build stats: <click here>

Ford Performance Club ACT
JC is offline   Reply With Quote Multi-Quote with this Post
Old 10-07-2006, 02:15 PM   #8
TheSneakiness
Adapt or perish...
 
TheSneakiness's Avatar
 
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
Default

Quote:
Originally Posted by JC
If you have superlows or lwer in the back of your car, the front may be sitting a little higher than the standard front/rear angle of the car from factory, which may be causing your headlights to point up slightly. Given that the AU has some of the best factory lighting in a modern car, the increased up angle (even though only slight) may be enough to cause dazzle to other drivers. I had this problem with my XR, and reinstalling the lows in the rear has sorted that problem. (Plus the tree tops no longer get lit up)
I was actually talking about this problem at work, and someone else mentioned that it could be that.

I'm going to measure from the ground to the top of the wheel and see what happens there. I've got a funny feeling that it sits lower in the back, in which case I'll be getting some leaf springs replaced.
__________________
Carless
TheSneakiness is offline   Reply With Quote Multi-Quote with this Post
Old 10-07-2006, 05:10 PM   #9
parker
Regular Member
 
Join Date: May 2005
Location: Near Wagga
Posts: 229
Default

I've found other AU's particularly bad in this respect and have been flashed by oncomers when driving mine quite a lot... tells me one thing, it's something about AU lights that is harsher on the eyes so I certainly dont go 'punishing' the people who flash me to let me know they think I've got my high beams on still. Instead I give them a short flash of my highs to let them know I am on lows already.

The main direction of the lights is probably 'correctly aligned' but perhaps the very unusual shape of the lights is at fault?
parker is offline   Reply With Quote Multi-Quote with this Post
Old 10-07-2006, 07:42 PM   #10
The Dok
FF.Com.Au Hardcore
 
The Dok's Avatar
 
Join Date: Feb 2005
Posts: 805
Default

This (dazzle) is a real problem for the AU (non XRs mostly), the headlight has an awesome reflector (in size & output) & oncoming drivers need only catch a glimpse of the AU either turning or wallowing & assume that high beam is on, Taxi's are notoriously annoying for this, (probably due to sagging suspension).
If in doubt, I generally advise people to adjust them down a notch or 2.
Thanks for the plug too Simon!! (not on FF much anymore these days). :
__________________
Removed by laminge
The Dok is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:36 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL