|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
21-01-2009, 02:54 PM
|
#1 | ||
|
Regular Member
Join Date: Jul 2007
Location: Auckland
Posts: 54
|
I have fitted a XR8 to my XB. To do so I eliminated the AU header tank (no room) and made a fitting on top of the thermo housing to include a pressure cap. The pressure cap is usually on the header tank. The center pipe on the radiator has been blanked off. (This used to go to the header tank) I than ran the pipe on the radiator hose to a replacement header tank. see photo. The problem is that it blows of hoses in a spectacular fashion. I wonder if someone could confirm that the mod I have done is OK or not. Thanks Steve
|
||
|
|
| Thread Tools | |
| Display Modes | |
|
|
XR8 fitted in XB Blows of Water hoses
Threaded Mode