|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
18-10-2009, 04:58 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
|
Hey Hey,
I asked how to remove the roof console the other week and nobody was really sure but some had a rough idea. So i got stuck into mine today as it has to come down soon to re glue the lining back to the board. Remove the Jesus bar from the passenger side by flipping it down and unscrewing the two screws. Same with the sun visor, Flip it down and unscrew the two Grey screws. The door seal needs to be pulled down as well which is easy. The pillar trim is pulled off gently and is only held in by clips. There is one screw in each sun visor retainer that needs to be removed. There is also a clip which can be hard to remove so i used a screw driver and pulled down on the handle and the blade at the same time The lining will pull down now enough to get to the map lights and the screws that hold in the console. Hope it helps someone out there who wasn't sure how to get to the map lights or the console. Beer Baron ;)
__________________
AU XLS. |
||
Thread Tools | |
Display Modes | |
|