CMS Cam + Tune results :)

[ayeyew]

Well, as most of you guys know, my car has been the guinea pig for the CMS Stage 2 AU Cam and tune.
Joe @ CMS has spent countless hours on the tune and my car has had to have had in excess of 100 dyno runs over the past 12-18 months.

The end result is:
151rwkw -- keep in mind this is a mainline dyno, which usually reports around 10% lower than a dynodynamics dyno. So i'd prolly be looking at around 165 on one of those.

Car originally started at 123rwkw before the cam and tune and 131rwkw with the cam in and no tune

So, a gain of nearly 30kw at the treads is a pretty decent figure for just a cam and tune

If you are interested, or want a little more info then ring Joe @ Crescent Motorsports on 9600 6229

He also has a stage 2A cam for the AU (for the auto box), which should get about 50Nm more (so close to 400Nm)

To be honest, i can't remember what the car was like before the cam and tune. But, the thing has some get up and go now, that is for sure!!

It's very punchy down low now with the final tune, it almost feels like im driving in 2nd gear when i am in drive. The thing hauls *** after 70km/h

It's a great deal of fun to drive

I have nfi how the guys with xr6t's with 400rwkw can control their car, lmfao