do u understand ur feista car computer?

[jerryaus]

Hi guys, I think not many people know that how to put the car computer into manufactory mode, here is the way~~~

First, push and hold the tripmeter reset button, then turn the ignition to II position, release the reset button until u see the information display shows "test".

To logout the manufactory mode, just simply switch off the ignition.

On the information display, u will see some different numbers, some of then might be different as what I wrote here, but just follow the step, here we go:

1.9A9E: checking all meters.

2. checking the lcd screen

3. checking all LEDs

4. showing computer ROM level & model

5. Er.....: no require

6. E...: no require

7. dt.....: the manufacturing date of meters

8. DTC codes

9. NONE

10. SP...mph: car speed

11. SP...km/H: car speed

12. SG....: no require

13. tA....: engine speed (RPM)

14. tg.....: no require

15. od....: mileage

16. F .....: fuel system, 000-009>>short circuit, 010-254>>normal, 255>>out of order

17.fg....: no require

18. FL....: no require

19. FP...: fuel position, from 00 to 64, 64 means 100% full tank, FF means unable to read

20. XXX C: engine coolant temperature, 0-254, 255 means unable to read

21. ...Cg: no require

22. bt...: car battery voltage

23. dtE...: remain KMs until fuel running out

24. rAF...L/100KM: average fuel consumption since you change or remove the car battery last time, or from new car