|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
14-11-2006, 08:55 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Perth
Posts: 936
|
Hey guys,
Need some qualified advice please - AU XR8 III Auto CD Stacker jammed so I disconnected the battery and reconnected it, result unjammed CD stacker. Car ran rough on reconnection so i did the reset procedure as described here. Problem is the car is not running as well as it used to. The car starts well but when I move the selector to put it into reverse the revs drop to about 500 and then quickly rise up again when when it is locked into reverse. Also after the car has been in Drive and then put into neutral it stalls most of the time. Any ideas what the problem is here and how to rectify without visiting Ford? Cheers Nathan Also lately its becoming very difficult to hot start after being off for a short period of time. I'm not sure that this is related to the battery being disconnected. |
||
|
|
Problems after reset
Threaded Mode