|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
01-03-2007, 05:39 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Adelaide, SA (down South)
Posts: 623
|
The other day i attempted to install an electronic shift kit into my mates xr8, after finally getting that anti tamper bolt out i went to take the cradle off the ecu but it was fouling on the dash, i tried every concievable angle, pushing pulling but it wouldn't clear the dash. surely to god you don't have to take out the bottom part of the dash...... do ya. Can some one please explain how to get the ecu out please, i don't really want to start pulling other bits off that aren't needed to. Any help would be greatly appreciated.
Thanks Benny mac
__________________
New Project: 1980 MK2 Escort Panel Van, 2lt, auto  Soon to be painted running a 4.0ltr v6  See the build here http://www.fordforums.com.au/showthread.php?t=11388068 You Have Freedom of Speech Just Choose to Remain Silent |
||
|
|
au2 xr8 ecu
Threaded Mode