|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
01-04-2007, 02:28 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Apr 2005
Location: Adelaide, SA (down South)
Posts: 623
|
Hey fellas,
I'm in the process of modifying my bro's au3 falcon, the original plan was to put a vct motor in but that got canned because of a little too much extra work needed. My next question is what cam you guys run in your i6 engine. I have no idea what cams go well with these engines. The car will shortly be running a nice exhaust, bigger throttle body and an upgraded cold air intake all due to be on in the next 3 weeks hopefully. So i just need some feed back or advice on the cam as the quicker the cam goes in the quicker the CAPA flash tune can be installed and the quicker the car will be. Thanks heaps fellas, any advice would be good Benny Mac
__________________
New Project: 1980 MK2 Escort Panel Van, 2lt, auto Soon to be painted running a 4.0ltr v6 See the build here http://www.fordforums.com.au/showthread.php?t=11388068 You Have Freedom of Speech Just Choose to Remain Silent |
||