|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
28-05-2007, 03:18 PM
|
#1 | |||
|
Back to Le Frenchy
Join Date: Feb 2005
Location: Back home.....
Posts: 13,346
|
I've done a search and had a read but for the life of me I still can't figure it out. I've removed the rubber grommet from the rear disc and I've found what looks like it is an adjuster, the inspection hole is at 3 o'clock on the pass side / 9 o'clock on the drivers when I can see the adjuster. Now which way do I turn it? I reckon I could almost get a small flat blade screwdriver in there but I just need to know whether I turn the screw clockwise or anti clockwise on each wheel.
__________________
Quote:
07 Renault Sport Megane F1 Team R26 #1397
|
|||
|
|
AUII IRS Handbrake
Threaded Mode