|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
22-07-2007, 04:48 PM
|
#1 | ||
|
Regular Member
Join Date: Jul 2005
Posts: 56
|
I have a AU series 1 forte 4L, whose thermo fans aren’t running, I've tested the fans and they both work, I've tested the relays and they all work, all 3 of them, the fuses are ok, I tricked the computer into thinking it was running very hot (took sensor off back of the motor and placed cable across joints and nothing happened other than gauge reaching hot and warning sound going off, all the wires and that look ok, and neutral works fine on the 4 pin connector. But I get no volts from the others going to neutral. If I short over all the relays with a piece of wire only 1 fan works the one closest to the relays, drivers side, the other fan doesn’t come on, I'm guessing there is some sort of switch controlling the path somewhere else but don’t know where, is there a wiring diagram around for this? I check the wiring diagrams on the site but couldn’t see it there any ideas?
Any help much appreciated. Jono |
||
|
|
Thermo Fan Problems
Threaded Mode