|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
17-01-2009, 11:09 PM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2009
Posts: 2
|
I decided to rip the double din stereo out of the car and replace it with a single din deck. I pulled out the old in dash 6 stacker which I believe is from a 2001 au so I chopped the loom there tapped up the ends and decided I would do the rest the next day with spade clips. I also had a a headlight that was dim so I changed both of the bulbs as well. I removed the battery to make it easier to get to one of them then when I put the battery back and started it the indicator lights stay on and the high beam light also there is a weird electrical humming and a clicking but it is only when I put the lights on. The car starts fine and runs ok but whenever I put the lights on I get this same problem. Any ideas? Have I damaged ecu or something?
|
||
|
|
AU Series 1 XR6HP 98 Battery Problem???
Threaded Mode