|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
27-07-2005, 05:43 PM | #1 | ||
Guest
Posts: n/a
|
hi everyone. i just put new diff gears. i went from standard 3.23-3.55. the car feels quicker mainly down low but at the drags, the 660ft mark they are a tenth better but by the 1000ft mark they are slightly slower. the car is doing about 5000rpm in third over the finish. the only thing i can think of is the gear changes
in the auto. has anyone else experienced this or no why it is happening. could it be something to do with the computer? any advice would be great as the gears are getting changed again because they came out of another car and are noisy. trying to decide between putting standard gears back in or forking out 500 for a new set |
||