|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
27-03-2010, 07:49 PM
|
#1 | ||
|
Starter Motor
Join Date: May 2008
Location: Geelong
Posts: 8
|
Hi there
Any Ford guru / automotive techs able to shed some light on how you replace the fuel filter on a 1998 KJ Laser hatchback. The filter sits in a cradle ob the firewall adjacent to the throttle body but lower. I removed the evaporation canister which gains you access to the bolts on the cradle and the outlet hose clamp and hose, but I can't get enough slack in the inlet line to get to the clamp and hose on the bottom of the filter Even put the vehicle up on ramps top get to it from the bottom but there is too much mechanical stuff in the way. Has to be an easy way to do this job.. Any clues anyone, please. Cheers |
||
|
|
Fuel filter replacement.
Threaded Mode