|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
26-03-2012, 08:53 PM | #1 | ||
nou
Join Date: Oct 2007
Posts: 634
|
So I had a lesson with an instructor today, all good apparently, and I'm ready to pass more or less.. One thing however, the car I will be doing the test in is a 1969 Kombi.
The gearbox layout is 1-2-3-4 with reverse being under second (Push down the stick, move bottom left). Now I've tested a VW beetle at a dealership and the gearbox was obviously the same layout, however second slotted in perfectly. In the Kombi it rarely (1/10 of the time) slots into reverse properly. I'm worried when it comes to either the 3 point turn or the reverse parallel park, I will stuff it up, grind reverse (happens when it isnt in properly) etc.. The instructor really drilled the 2 hands on the wheel at all times thing to me today, I have a habit to break there, so naturally I'm thinking holding it in reverse while backing up probably isn't the best look. So does anyone have any tips on what to do in this situation? Thanks. |
||