|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
29-05-2012, 04:44 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2010
Posts: 66
|
Need help, going to replace water pump purchased a Max Ellery manual and it is very unclear on how to remove the belt. It states to fit a 3/8 drive socket to the idler pulley. There is no where that i can see to insert a drive socket as it has a nut on it and does not look like it will move to release tension anyway. The ony thing I can come up with is to put a 15 mm socket on my tensioner and turn it clockwise or anti clockwise is this what I do? It is the only thing that looks like it will move. Any help would be appriciated. any pictures would be great. Pity the manual is not much help The tensioner also has a nut on it.
Thanks |
||
|
|
How to remove serpentine drive belt from au 5 litre
Threaded Mode