|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
29-05-2012, 11:25 PM | #1 | ||
Regular Member
Join Date: May 2006
Location: MELBOURNE
Posts: 61
|
Hi guys I have this Fairmont 2000 AU II that just stopped running on petrol.
It has Dual Fuel with an IMPCO system 200 mixer 3 years old which runs Perfect ...except at start up which back fires 30% of the time. In saying this all pointed to a New petrol pump and filter as the Impco system Needs petrol to start the motor propley which should also stop the back fire you would think, and if not add new leads and coil pack. I brought a complete new VDO fuel pump thanks to irdonn link on the Forum and also a new Ryco fuel filter and the same time changed the plugs but used normal range which had before The pump is now working you can here it coming in and out when it’s on gas Like it should, there are still a couple of back fires but not as much Once again the car runs perfect on the gas with a little bit less back fire than before But at start up only other wise its GREAT THE Problem is it won’t run on PETROL I know the pump is running Petrol comes out of out let when cranking When I take it for test run and go from Gas to petrol it Dies Sometimes it might start but sounds its on 2 pistons you can hear the Pump then it dies after 15 sec I just don’t know what I can do anymore I wonder if any one else has had this problem with the AU II ... Please |
||