|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
13-09-2012, 02:36 AM
|
#1 | ||
|
I Hate Rust!
Join Date: Oct 2005
Location: Perth
Posts: 228
|
Hi
I've just replaced the discs and callipers on my AU2 with standard BA discs and callipers. I'm not quite finished as I still have to bleed the lines but I'm concerned by the brake hose bracket that tethers the hose to the strut. I've read that you need to use the BA hoses and the BA brackets to hold the hoses. The ones on my AU appear to be spot welded onto the strut and in the wrong position. Do I need to remove some brake hose brackets from a pair of dead BA struts and weld them to my AU struts? How have you guys who have done this conversion solved this problem? Thanks Chris |
||
|
|
AU2 BA front brake conversion. Brake Hose Bracket Question
Threaded Mode