|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
23-12-2012, 12:16 PM
|
#1 | ||
|
Regular Member
Join Date: Jul 2010
Posts: 70
|
G'day,
I need help, 1969 MK2 Cortina will not start. I know it's not rocket science, which is probably why I'm not a rocket scientist, but here's what I've done so far: Replaced starter motor and solenoid, replaced all battery leads, additional chassis and battery earth connections installed, replaced auto trans inhibitor switch, checked and tested ignition switch. I have tried two different batteries, results are the same. I have power where it's supposed to be going, but starter does nothing but click. Engine will not even turn over. Is it possible the auto trans has jammed or something, not allowing the starter to engage with the flywheel or whatever? Any advise would be greatly appreciated, I need this car going so I can take my Fairlane off the road for some TLC. Cheers. |
||
|
|
MK2 Cortina Starting Problem.
Threaded Mode