|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
21-01-2013, 11:54 AM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2012
Posts: 3
|
Issue with Falcon AU2 6cyl 4.0 petrol only shudder when accelerating.
When I accelerate in about 3rd gear (automatic), and around 60-100kph, the car shudders, When I disconnect the Throttle position switch on the AMM, the car no longer shudders. I have replaced the Throttle position switch, ignition leads, spark plugs, injectors, spark plugs, fuel filter, oil filter, oil, air filter. Was wondering what else this could be. It seems like an electrical issue from the Throttle position switch back as disconnecting this clears the issue. When the car starts shuddering, the dash reads "cruise control set" - my au is a Forte and doesn't have cruise control, so im confused as to why this appears. I have no ABS, no cruise control and no LPG. This is a 2001 AU2 sedan, non-IRS, 6cyl auto 4lt If someone can give me some help isolating the cause of the shudder it would be much appreciated Thanks |
||
|
|
Issue with Falcon AU2 6cyl 4.0 petrol - shudder when accelerating
Threaded Mode