|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
28-06-2014, 09:11 PM
|
#1 | ||
|
Fordluva
Join Date: Dec 2010
Posts: 105
|
Hey all, got a 200kw AU2 Xr8 with a stinky exhaust and drinking the fuel like there's no tomorrow. So ,air filter good plugs and leads O2 sensors new no faults using Forscan,runs well. When you get out of the car your clothes stink of exhaust especially if you walk past the back of the car while its running. So I disconnected the MAF sensor plug and it seems a whole lot better apart from the loss of low speed (1000 to1500rpm drivability),motor feels a bit perkier has a better exhaust note and has a bit of a pop on the overrun. Did a mileage test 80% highway 20% urban 11l per 100kms which seems to be in the ballpark. So can anyone tell me what the readings for the MAF should be on the Forscan dashboard at idle and under load.
|
||
|
|
200kw AU Xr8 Chewin the Juice
Threaded Mode