|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
30-09-2014, 04:55 PM | #1 | ||
Regular Member
Join Date: Apr 2009
Posts: 41
|
For those unlucky enough to have this happen, heres a money saving venture for you.
SWMBO's car developed a rattle at idle in the clutch area and after much googling and a chat with my mechanic, we decided the flywheel had failed. After ringing every available supplier in my area of the state (TAS), I took the advice of of a fellow FF bloke (I think, read too many posts on the subject to remember) and purchased from the UK, in fact I ended up buying from auction on ebay UK. The cheapest I could find here was from Repco at $1500.00 (yikes) for DMF and complete clutch kit, LUK brand. I won the same kit for $716.00 including postage, to my PO Box. It took exactly 7 days to arrive which I was amazed with considering its such a heavy set up. The boxes were in a poor state of repair as I'm sure every country it passed through had a look inside but it was all there and intact. $816.00 later, including a new rear main seal while things were all apart ($40 I think) and she's back on the road running better than ever. Taking the gamble on purchasing this item from overseas as good as covered my labour costs. I hope this helps someone as lucky as me. |
||
2 users like this post: |