![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
Shockworks Ford damper specialist located in Melbourne's S.E suburbs. Website Link |
|
Thread Tools | Display Modes |
![]() |
#11 | ||
Starter Motor
Join Date: Dec 2013
Posts: 1
|
Just fitted the Shockworks front fixed brake upgrade to my FG Mk2 XR6T Ute. You can see from the picks that these have the new floating look clips even though the rotor is a fixed setup.
![]() ![]() These brakes fitted without any hassle and the service from Brett at Shockworks was outstanding! I recommend that you purchase the braided lines at the same time. You can use the standard lines, but they are a tight fit and will not have the length available to use the standard fixing points like the braided lines. Excellent stopping power compared to the slotted/dimpled RDA rotors with Bendix HD pads I previously had on the car. Low to no whisking noise and zero brake squeal is one of the other benefits. Expect to find your nose on the windscreen if you hit the anchors. Once again can't say enough about the service from Shockworks ![]() Looking forward to seeing the rear rotors when the arrive. Cheers, Ben |
||
![]() |
![]() ![]() |
3 users like this post: |