|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
31-01-2016, 12:29 AM | #1 | ||
FF.Com.Au Hardcore
Join Date: Jul 2011
Posts: 4,819
|
I just did the water pump on our KJ 1.8 twin cam
Pump is good, but I suspect when I did the timing belt I got it wrong, as it runs like a hairy goat now I had to guess the timing marks as had no workshop manual Devo'd that I have to pull it down again Can you guys tell me what the orientation of the two cam sprockets should be? I've got the crankshaft one sorted, as it's easy to see the top dead centre mark There seems to be at least 3 three marks on each cam sprocket and both have an "E" and an "I", as well as a "Z" I always thought they just had an e for exhaust and an I for inlet which had to be lined up in the centre Thanks so much |
||