|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
13-02-2005, 09:06 PM
|
#1 | ||
|
buickman
Join Date: Dec 2004
Location: eastern suburbs Melb Vic
Posts: 1,462
|
Since last weeks dyno day it has been annoying me that the car ran rich which is why fuel milage is average around town. I cleaned the BMC air filter but still not happy as when you boot it a hesation was felt. I decided to open the front of the air box with a holesaw and fit a new ryco filter to see how it went after. While working on the car I replaced the drivers side globe which I should have done weeks ago but found it difficult without removing the battery. After I fitted everthing up. I took the car for a run onto the Monash freeway. The car felt healthier when floored but on the C/control litres per 100ks it was showing 21.8 per 100 from the 14.5per 100 I was getting before and after 1 days driving it has only dropped to 19.8 per 100. Will this change or have I upset A/F settings.
buickman |
||
|
|
The Casper Type Mod to Airbox
Threaded Mode