|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
30-07-2018, 12:33 AM
|
#1 | ||
|
Starter Motor
Join Date: Jul 2018
Posts: 1
|
I'm trying to confirm the correct clutch release arm, release bearing & release bearing carrier for a 1600 crossflow (711M block) & type 3 gearbox. I am told that the engine & gearbox are from a Capri 1600, but they are fitted into a Clubman type car (think Lotus Seven style). I have an arm, carrier & bearing, but the release bearing & carrier are loose on the main gear retainer (the front part of which is the sleeve around the main input shaft) and they should be a sliding fit. I have not been able to find any good pictures or part numbers that show the correct parts. Does anyone have pictures or part numbers? The fingers on the clutch diaphragm spring have curved tips so the release bearing should have a flat face. I have looked on various sites like Burton Power etc, but have not been able to confirm the right parts.
|
||
|
|
Capri type 3 gearbox clutch release bearing
Threaded Mode