Ford's 2019 7.3L pushrod V8 - Australian Ford Forums

Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

		Australian Ford Forums > General Topics > The Pub
Ford's 2019 7.3L pushrod V8

FAQ

Calendar

The Pub For General Automotive Related Talk

Thread Tools

Display Modes

03-01-2020, 10:54 AM

#26

jpd80

FF.Com.Au Hardcore

Join Date: Jan 2010

Posts: 11,412

Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Thoughtful contributions to our community

Re: Ford's 2019 7.3L pushrod V8

Quote:

Originally Posted by Bossxr8

Looks like that graph goes to 6000 rpm. It’s definately not an low rpm slugger. Holds that torque well across the rev range.

A lot of that is being achieved with 14.7: mixture strength to keep the engine efficient,
that and the derating ~30 HP/30 lb ft that applies to Super Duty ratings.

The same engine in F150 with no tune change suddenly becomes 460 HP /505 lb ft.

Those big 4.22" bores and the guy who did the Coyote heads also did these wedge heads.

6 users like this post:

Bossxr8, Franco Cozzo, ivorya, Mechan1k, roKWiz, Romulus

« Previous Thread | Next Thread »

Forum Jump

All times are GMT +11. The time now is 06:19 AM.

Positive SSL