|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
20-04-2020, 01:28 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2005
Location: Tweed Heads
Posts: 404
|
Car: Manual AU2 XR8
Symptoms- Car randomly ides high(around 1200) when coming to a stop. If you engage clutch with it in gear it will return to normal. Codes: P0500 Vehicle Speed Sensor fault This comes back when car is started after being cleared. Also have seen P0350 ign coil primary/secondary fault but doesn't come back. Have a feeling this comes up during cold starts if it stalls but not 100%. I have replaced the VSS on the transmission, still code and issue. Plug and wiring looked fine around the transmission. Speedo and cruise control work fine. But car seems to not know when it comes to a stop. I guess next step is to check the wiring. So 3 wires on the sensor red and white going to the cluster then to PCM and a black/green earth. Any advice would be appreciated.
__________________
2001 AU2 220 XR8 - Build thread |
||
|
|
Vehicle Speed Sensor
Threaded Mode