|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
|
|
Thread Tools | Display Modes |
03-10-2020, 06:40 PM
|
#1 | ||
|
Starter Motor
Join Date: Jun 2020
Posts: 2
|
Hi from the other side of the ditch
I have a problem I hope a smart Ranger owner can help me with. I have just installed a nice light bar on the XLT using a plug and play loom. It works perfectly BUT I would like to replace the teardrop switch with a 5-pin led rocker. Evidently, I need to make some changes to the relay wiring as I can find no combination that makes the switch work properly. The relay is a TR H101-12v four pin Pin 30 has the battery +ve and a blue (+ve)? to the switch Pin 65 has a white wire to the switch Pin 87 has the positive to the bar Pin 85 has the -ve to the battery and the -ve to the bar and the black (-ve)? to the switch. Thanks Mike |
||
|
|
Lighting Bar Switch Wiring
Threaded Mode