![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
![]() |
#10 | ||
Donating Member
![]() Join Date: May 2008
Posts: 12,177
|
P&S Absolute – A New Rinse-less Wash Solution.
https://www.detailstore.com.au/produ...ca25d3e2&_ss=r https://carcareco.com.au/product/ps-...inseless-wash/ https://autobuff.com.au/products/p-s...0feaf435&_ss=r P&S Absolute is a ground up new rinse-less wash designed in conjunction with The Rag Company. Absolute is a polymer cleaning solution that encapsulates and then emulsifies dirt “beyond what soap is capable of”. This product can also soften hard water, reducing the chance of water spotting in warmer weather. Absolute can be used to clean paint, plastics, trim, leather, upholstery and glass. It’s safe to use on ceramic coatings, PPF and vinyl wraps. ![]() While its primary role is for rinse-less washing at a 256:1 dilution ratio, Absolute can also be used as a clay lubricant at 128:1 or as quick detailer at 64:1. For interiors or glass cleaning, P&S recommend the 256:1 dilution. I have covered rinse-less washing technique in previous posts, so here are a couple of key product usage points – -For rinse-less washing, measure out 7.5 litres of water in a bucket before adding 30ml of Absolute. ![]() ![]() ![]() -For the pre-soak solution, P&S recommend the same 256:1 dilution. Either mix this up in a bottle or fill up a bottle from your bucket solution. For a 1 litre bottle, add about 4 ml of Absolute. A syringe makes measuring such a small amount easier. ![]() ![]() ![]() ![]() - Absolute has one of the better scents in this category, a subtle Coconut aroma. -While Absolute produces a slick surface by itself, combined with other P&S products like Paint Gloss, Dream Maker and Bead Maker as a drying aid will make the paint super slick and glossy. ![]() ![]() ![]() -While Absolute can be used in direct sun, like most detailing products, it’s best used on cool surfaces out of the direct sunlight. The water softening effect does however reduce the risk of hard water spotting. -Once you have finished washing the exterior, you can soak another towel from the bucket solution to wipe over your interior surfaces. P&S and The Rag Company have hyped this product quite a bit, promoting it as a “game changer”. Personally, I wouldn’t go that far. It is a very good product, think of it as a new generation of Optimum No Rinse. I can say though that Absolute is better than McKee’s N-914, the current benchmark in this class for many. I certainly feels slicker and doesn’t exhibit the slight “stickiness” that N-914 possesses. I wouldn’t rush out to replace your current rinse-less products with the release of Absolute, but I would certainly recommend giving it a try at some stage.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
||
![]() |
![]() ![]() |