|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
|
|
Thread Tools | Display Modes |
07-09-2006, 06:05 PM
|
#1 | ||
|
Regular Member
Join Date: Mar 2006
Location: Perth, WA - NOR
Posts: 325
|
Well on the way home from the Rallye Sport Club meeting last night I drove home like a granny right up until the last corner from home and I decided to give it a bit.
Well after leaving first at 7000 I dropped second and hit the gas but as it turned out I hit the gate and the tacho (which only reads to 6000) spun right back round to about 500 which at a guess would be pushing 9... Put it in gear and it was down to three cylinders... Boy did I feel like a tool.  : Getting towed to ERR on Monday so Tony can fix it (again)... Moral of the story, if your gonna give it **** make sure its in gear...
__________________
GGR | SCT | Tein | Samco | Whiteline | Mongoose | Forge
|
||
|
|
1600 xflow + 9000rpm = bent valves
Threaded Mode