|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS |
 |
|
|
Thread Tools | Display Modes |
28-01-2007, 12:02 AM
|
#1 | ||
|
Starter Motor
Join Date: Nov 2006
Posts: 11
|
G'Day I am going to fit a AU 4.0 motor into my EB and would like your advice.
Ive got the motor and I am going to run the EB dizzy, MPI, Eingine Mounts & Thermo's. Now I know you have to grind the front of the sump, I am running the AU water pump, power sterring. I know I need a XH Tensioner & about the bellhousing bolts & bottom hose. Now what I am not sure of is if I put a EF/EL Air compressor on Which bracket should I use, EB,EL or AU? Also which Belt XH,EL,AU or something else? If it's an EB Bracket Ive seen threads where the EB bracket dosn't sit flat agains't the block, Do you need to use spacers? Which Belt? Or is it possible to run it without the Air Compressor? If so Which Belt do you use? Any thing else you can think of that might be helpful. Thanks Les |
||
|
|
|
28-01-2007, 01:05 AM
|
#2 | ||
|
Tuned @ Pitlane Frankston
Join Date: Aug 2006
Location: S.E Suburbs, Melbourne
Posts: 1,879
|
OED666 seems to have done what you're doing. He used the original a/c compressor bracket from his ED, and the XH Tensioner + belt.
__________________
BA MKII XR6 Turbo, 6sp Manual - Vibe purple, Premium sound, Sports leather, BA XR8 wheels, Koni adjustable suspension, Nizpro v/springs, Walbro in-tank pump, Siemens 60lb injectors, Process West stage 1 intercooler, Mal Wood 11" Option 3 clutch, Tripod gauges, Custom Mainlube T56 gearbox oil, ETM turbo oil feed line, Typhoon intake, BMC Panel filter, Turbosmart BOV, Tuned by Pit Lane Performance - 300.4rwkw @ 12psi
|
||
|
|
|
|
29-01-2007, 08:00 AM
|
#3 | ||
|
PM me if you want
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
|
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA Send me a PM if you want to know anything 2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Eb-au
Linear Mode
