Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 06-02-2007, 03:00 PM   #1
XFshep
Bodysnatcher
 
Join Date: Jul 2006
Posts: 130
Default help, bonnet jammed shut.

well i finally got my mk4 ghia back together and slammed the bonnet shut only to realise...****, i left the radiator cap off somewhere under the bonnet.

when i went to pull the cable release i think it either snapped or slipped out of its mount in the engine bay because theres no tension on it.

please, somebody has to have had this problem before and i really want to get this bastard out of my garage today and on the road, so any help on a manual release or something like that is much appreciated.

XFshep is offline   Reply With Quote Multi-Quote with this Post
Old 06-02-2007, 03:16 PM   #2
EA2BA
PM me if you want
 
EA2BA's Avatar
 
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
Default

any space to get your hand up behind the radiator and then push the holding pin accross, otherwise rip the grille out (not preferred)
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA

Send me a PM if you want to know anything

2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
EA2BA is offline   Reply With Quote Multi-Quote with this Post
Old 06-02-2007, 03:30 PM   #3
XFshep
Bodysnatcher
 
Join Date: Jul 2006
Posts: 130
Default

Quote:
Originally Posted by EA2BA
any space to get your hand up behind the radiator and then push the holding pin accross, otherwise rip the grille out (not preferred)
not entirely sure of the location of the latching mechanism, will have a go though.
XFshep is offline   Reply With Quote Multi-Quote with this Post
Old 06-02-2007, 03:32 PM   #4
EA2BA
PM me if you want
 
EA2BA's Avatar
 
Join Date: Dec 2004
Location: Pk Ranger Modding - QLD 👍
Posts: 7,498
Default

right up the top, this is from memory

it has a big pin with a spring and the pin is spear shaped at the end, the actual locking bit is just a spring loaded slide that when the spear passes past it, the slide flicks back to hold it from popping up.
__________________
Owner of first ever car to retrofit BA SSS - the EA2BA

Send me a PM if you want to know anything

2010 Ford Ranger PK High Rider (Auto) - 2011 Ford Fiesta (Auto)
EA2BA is offline   Reply With Quote Multi-Quote with this Post
Old 06-02-2007, 03:57 PM   #5
XFshep
Bodysnatcher
 
Join Date: Jul 2006
Posts: 130
Default

damnit, cant find any way to get my hand up in there and i dont really wanna bust up the grille. screw this, a job for another day.
XFshep is offline   Reply With Quote Multi-Quote with this Post
Old 06-02-2007, 06:00 PM   #6
binalong
Starter Motor
 
Join Date: May 2006
Posts: 13
Default

a screwdriver onto pivot pin and push,takes a bit, but can be done...just get the angle right
binalong is offline   Reply With Quote Multi-Quote with this Post
Old 11-02-2007, 05:08 PM   #7
XFshep
Bodysnatcher
 
Join Date: Jul 2006
Posts: 130
Default

managed to get it open with someone pushing down on the bonnet while i pulled the cable, radiator cap was wedged under the cable and stretched it, so ill have to tighten the bastard up now.
XFshep is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 05:27 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL