|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway. |
 |
|
|
Thread Tools | Display Modes |
29-02-2008, 04:42 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2006
Posts: 827
|
Can anyone tell me why drag cars paint a white strip and white band on the sides of the tyres? I noticed at WSID that some top fuellers had it, but others didn't. Just curious to know what it's for
 : PS I'm amazed by the shape the tyres get at the end of the strip, check the first pic out!   |
||
|
|
|
29-02-2008, 05:15 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Location: Working, chasing after my daughter and working
Posts: 3,407
|
Helps to see what the tyres are doing when launching etc.
|
||
|
|
|
|
29-02-2008, 07:17 PM
|
#3 | ||
|
Red Eye Racing
Join Date: Sep 2005
Location: Looking for a drag strip
Posts: 720
|
And if your not using beadlocks they are also good for checking if your slicks rotating around the rim, well the stripe does anyway.
|
||
|
|
|
|
29-02-2008, 11:00 PM
|
#4 | ||
|
RIP Craig - 13/11/08
 
Join Date: Feb 2005
Location: Kilmore, 30 minutes from Heathcote Raceway
Posts: 3,571
|
It lets the crewmembers look for shake in the first 300 feet of the race track and to also see how quick the tyre gets "up" by seeing that you know if you have enough clutch in the car for the race track conditions. It's important to get the tyres up as quick as possible to get good ET's.
Cheers Craig |
||
|
|
|
|
02-03-2008, 12:04 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2006
Posts: 827
|
Cheers guys!
|
||
|
|
|
|
03-03-2008, 08:28 AM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2006
Location: TAS
Posts: 2,551
|
I also use it as it makes it easier to see if the tyre is spinning or slipping on launch
__________________
XA coupe 8.8sec @ 150mph http://www.fordforums.com.au/showthr...coupe+drag+car BA GT-P for the shed Mustang GT for the other half E3 chubsport - fully fat (and slow), sitting there waiting for me to get sick of it and sell it. BA XR6T for a daily NT Pajero for the bush XB 4 door project- swallows a BF xr6 turbo My dad is a generous bloke. He gave away his dead car batteries free of charge.... |
||
|
|
|
|
10-03-2008, 10:24 AM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: May 2005
Location: Kirrawee NSW
Posts: 826
|
exactly right..by filming the car from the side...then going through it frame by frame later..you can tell how the tyre is working during the run.
__________________
06' BF XR6T manual sedan in Bionic Blue.....written off 08/15......greatly missed... New ride....07' RSpec manual Typhoon in Winter White....factory sunroof, Premium sound, Process West intercooler, upsized tubing, valve springs, 1000cc injectors, Delphi intank pump,*modified turbo, 4" dump, 5" cat, dual 2 1/2" Xforce exhaust, Mal Wood Opt 5 clutch, Herrod shifter, Ozrace coilovers with adj. Whiteline bars, 6 spot Brembos, Edit by Crescent Motorsport.....382rwkws @ 1150nms on E85.... 
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
White Paint Markings on Drag Tyres
Linear Mode
