Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 16-08-2008, 08:19 PM   #1
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default Dash is driving me nuts!

Guys

before i take a sledgehammer to my dash, was just wondering if anyone has ever had a problem with a real squeaky rattle right up under the windscreen. There is the panel there that has the vents in it for the window demister and it is underneath that, I am thinking it is possibly a clip or something that holds the heater pipes etc on there?

Any ideas?

__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 16-08-2008, 08:22 PM   #2
bodes-sh
FF.Com.Au Hardcore
 
Join Date: May 2006
Location: Perth, South
Posts: 3,064
Default

nah, no ideas on that, but my glove box opener rattles, grrr

i would think it would be clipped in, but not sure if you could get to it without removing the whole dash...
bodes-sh is offline   Reply With Quote Multi-Quote with this Post
Old 16-08-2008, 08:28 PM   #3
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Quote:
Originally Posted by bodes-sh
nah, no ideas on that, but my glove box opener rattles, grrr

i would think it would be clipped in, but not sure if you could get to it without removing the whole dash...
the front panel i mentioned does come off on its own, had it off before but ive never been able to find what it is, was hoping someone might have an idea
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 16-08-2008, 10:32 PM   #4
Mont5.0
FF.Com.Au Hardcore
Donating Member3
 
Mont5.0's Avatar
 
Join Date: Nov 2007
Location: Riff
Posts: 12,405
Default

mine squeaks between the two panels-like they rub on each other. does my head in too!- just turn stereo up, one day i will fix it.
__________________
FGII XR6 IN LIGHTNING STRIKE
R52 SIII IN GUN METALLIC
Mont5.0 is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 12:54 AM   #5
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

Quote:
Originally Posted by b2tf
Guys

before i take a sledgehammer to my dash, was just wondering if anyone has ever had a problem with a real squeaky rattle right up under the windscreen. There is the panel there that has the vents in it for the window demister and it is underneath that, I am thinking it is possibly a clip or something that holds the heater pipes etc on there?

Any ideas?
If you sledge hammer the dash your mind after with a thousands squeaks will block out the sound and you won't hear it anymore.
Describe the sound better.Is it metalic? Is it like a loose panel? Post it so we can assist you better.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 01:00 AM   #6
fordon
FF.Com.Au Hardcore
 
fordon's Avatar
 
Join Date: Apr 2005
Location: edge of canberra
Posts: 817
Default

Quote:
Originally Posted by Mont5.0
mine squeaks between the two panels-like they rub on each other. does my head in too!- just turn stereo up, one day i will fix it.
This is the best easy option :-)
U shouldnt hear it over your big loud exhurst
fordon is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 06:36 AM   #7
au2sw
Blown 5L coming
 
au2sw's Avatar
 
Join Date: Dec 2006
Location: Warwick, QLD
Posts: 1,997
Default

i have an anoying squeak in the center of the dash where the plastic face of the a/c controls and stereo surround rubs against the vinal of the dash....just turn the music up a bit louder and i cannt hear it.....one day i may do something about it.....but not overly concerned.
__________________
1995 EF Fairmont was stocko 6cyl with open single spin diff....NOW WITH XR8 ENGINE, DRIVELINE AND SUSPENSION!!!!! Maybe by the end of 2010 there may just be a blower as well ;)


NEW CLUB FOR SUNSHINE COAST !! www.f-p-e.proboards.com

Contact Col (au2sw) via PM or on MSN @ efmonty@hotmail.com

Quote:
Originally Posted by Mr Hardware
Its like central locking in your car. We've all had cars without it and we were fine then, but try and take it from me? NO WAY.
au2sw is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 07:41 AM   #8
Mont5.0
FF.Com.Au Hardcore
Donating Member3
 
Mont5.0's Avatar
 
Join Date: Nov 2007
Location: Riff
Posts: 12,405
Default

Quote:
Originally Posted by au2sw
i have an anoying squeak in the center of the dash where the plastic face of the a/c controls and stereo surround rubs against the vinal of the dash....just turn the music up a bit louder and i cannt hear it.....one day i may do something about it.....but not overly concerned.
sound like there is an Echo in here! -Lol
__________________
FGII XR6 IN LIGHTNING STRIKE
R52 SIII IN GUN METALLIC
Mont5.0 is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 08:09 AM   #9
V8falcons
FF.Com.Au Hardcore
 
V8falcons's Avatar
 
Join Date: Mar 2005
Location: NSW
Posts: 1,802
Default

My wagon has a squeak right up near the windscreen too,if you've had a bit of a push and pull around the area,try the age old remedy of a full can of silicon spray it works wonders on sqeaks,thats all FORD use for any thing that wont fix it self
__________________
T2 TE50 no:154 Narooma blue
AU2 XR8 ute
XR4 fiesta
V8falcons is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 08:26 AM   #10
BIGJB
FF.Com.Au Hardcore
 
BIGJB's Avatar
 
Join Date: May 2008
Posts: 1,536
Default

Have to join the club here.
Have been searchin for a squeak for weeks.
Noow that I've lowered and its so much stiffer
it's drivin me nuts. :
BIGJB is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 09:03 AM   #11
Black XR
Narooma blue XR8 ute
 
Black XR's Avatar
 
Join Date: Sep 2006
Location: gold coast
Posts: 433
Default

I have a sledgehammer you can borrow
Black XR is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 09:36 AM   #12
rag top
FF.Com.Au Hardcore
 
rag top's Avatar
 
Join Date: Dec 2004
Location: ACT
Posts: 4,028
Default

Quote:
Originally Posted by au2sw
i have an anoying squeak in the center of the dash where the plastic face of the a/c controls and stereo surround rubs against the vinal of the dash....just turn the music up a bit louder and i cannt hear it.....one day i may do something about it.....but not overly concerned.

I had one in a similar area, and found that it went away with an air freshner mounted on one of the center air vents.
rag top is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 11:03 AM   #13
private9
www.TUFFCARPARTS.com
 
private9's Avatar
 
Join Date: Feb 2006
Posts: 5,221
Default

Quote:
Originally Posted by vctxr6ute
My wagon has a squeak right up near the windscreen too,if you've had a bit of a push and pull around the area,try the age old remedy of a full can of silicon spray it works wonders on sqeaks,thats all FORD use for any thing that wont fix it self
I was actually going to suggest the same thing! It's worked well for me in the past!
private9 is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 11:23 AM   #14
CAT600
I miss my wheelbarrow
Donating Member3
 
CAT600's Avatar
 
Join Date: Jan 2005
Location: Bluestreak Performance
Posts: 11,503
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always willing to help out fellow AFF members... Technical Contributor: For members who share their technical expertise. - Issue reason: Daniels knowledge of modular engines and superchargers is extremely valuable to the AFF community. I have learnt quite a bit just reading his build threads. His contributions are often utilised by other members. 
Default

I have the same.

Its funny, you hardly hear Taxi's squeaking in that area - therefore as somebody above mentioned, it has to be the effects of a lowered, stiffer (and hard driven) car.

Daniel
CAT600 is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 12:05 PM   #15
MGM
FF.Com.Au Hardcore
 
MGM's Avatar
 
Join Date: Jul 2005
Location: Lyndhurst
Posts: 563
Default

mine does to, i found mine to be the dash panel just touches the windscreen and makes it creak and does it when going down gutters to, i think the car is twisting when going over bumps crooked
MGM is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 02:42 PM   #16
Mont5.0
FF.Com.Au Hardcore
Donating Member3
 
Mont5.0's Avatar
 
Join Date: Nov 2007
Location: Riff
Posts: 12,405
Default

Quote:
Originally Posted by vctxr6ute
My wagon has a squeak right up near the windscreen too,if you've had a bit of a push and pull around the area,try the age old remedy of a full can of silicon spray it works wonders on sqeaks,thats all FORD use for any thing that wont fix it self
I tried this today. used about half the can. Only rattles now over large bumps (sh!te sections of road). But my shocks are r.s so that dont help. But definetly quietened it down.
__________________
FGII XR6 IN LIGHTNING STRIKE
R52 SIII IN GUN METALLIC
Mont5.0 is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 10:10 PM   #17
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

The cover youre talking about is held by philips head screws. When you get a chance Undo the screws and remove the panel. Then check the tightness of the retaining bolts for the dashboard to the firewall. Forget the sledgehammer ..find the problem.
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 17-08-2008, 11:01 PM   #18
Dark Horse
_Oo===oO_
 
Dark Horse's Avatar
 
Join Date: Dec 2004
Location: Canberra
Posts: 1,471
Default

Quote:
Originally Posted by b2tf
Guys

before i take a sledgehammer to my dash, was just wondering if anyone has ever had a problem with a real squeaky rattle right up under the windscreen. There is the panel there that has the vents in it for the window demister and it is underneath that, I am thinking it is possibly a clip or something that holds the heater pipes etc on there?

Any ideas?
Pull that section out and stick some double sided tape in there Austin,

Or you can harden up. :

Personally, I don't bother chasing the squeaks and rattles I might make things worse.
__________________
COURAGE - ENDURANCE - MATESHIP - SACRIFICE
Dark Horse is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 06:21 AM   #19
XR6-VCT-2000
Fantastic Plastic
 
XR6-VCT-2000's Avatar
 
Join Date: Jan 2006
Location: Mars most of the time
Posts: 2,019
Default

I had an annoying rattle that sounded like it was coming from my dash, I couldn't find it for the life of me. About 6 months later i found the rattle , it was coming from the rear vision mirror vibrating !!!, changed it and all ok now. It realy sounded like it was coming from the dash area at the time, it was driving me nuts.
__________________
------------------------------------------------------------

:eclipsee_
XR6-VCT-2000 is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 07:55 AM   #20
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Bah, ive pulled it out about 5 times already. Im going to try the silicone spray option today.
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 08:44 AM   #21
Mont5.0
FF.Com.Au Hardcore
Donating Member3
 
Mont5.0's Avatar
 
Join Date: Nov 2007
Location: Riff
Posts: 12,405
Default

Quote:
Originally Posted by b2tf
Bah, ive pulled it out about 5 times already. Im going to try the silicone spray option today.
i just covered my winscreen and speaker a bit, (mine was on the passenger side near the little tweeter), and went to town sprayed absolutely everything up and around there- including dash spear! Then wiped off excess with a towel. worked great!
__________________
FGII XR6 IN LIGHTNING STRIKE
R52 SIII IN GUN METALLIC
Mont5.0 is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 11:18 AM   #22
XRLNT-8
Monsoon SIII XR8 220
 
XRLNT-8's Avatar
 
Join Date: Mar 2007
Location: Adelaide
Posts: 102
Default

When I first got my xr8, I had this noise and I managed to track it down with much perseverance! It is not actually coming from inside the car but on the outside. If you look at the plastic cowling that touches the windscreen right by the windscreen wiper arms and give it a push you will hear the noise. I used silicone grease on the back of the plastic which lasts for a while. Hope this helps.

Cheers,

Simon

ps. I have a great fix for the rattly centre air vents if anyone is interested.
XRLNT-8 is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 12:03 PM   #23
Sox
RIP...
 
Sox's Avatar
 
Join Date: Dec 2004
Posts: 15,524
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: As recommended by Ropcher. Personifies the spirit of AFF. 
Default

Quote:
Originally Posted by b2tf
Bah, ive pulled it out about 5 times already.
And the dash?
__________________
.
Oval Everywhere...
Sox is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 01:12 PM   #24
BOTTLEDUP
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Location: Perth NoR
Posts: 5,971
Default

Quote:
Originally Posted by CAT600
I have the same.

Its funny, you hardly hear Taxi's squeaking in that area - therefore as somebody above mentioned, it has to be the effects of a lowered, stiffer (and hard driven) car.

Daniel

I've got exactly the same squeak in mine as well... It also looks to me like that trim/panel right at the front of the dash pad is distorted... Maybe from the heat of our WA sunshine. :(

I want to fix the noise because squeaks/rattles drive me nuts. If I want to hear a car falling apart I drive my VN.
BOTTLEDUP is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 06:47 PM   #25
b2tf
not here much anymore
 
b2tf's Avatar
 
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
Default

Thanks to Stav for correctly picking it - loose bolt where the dash bolts to the front end of the car. Put a bigger washer on it and tightened it right up - squeak gone for now but the real test will come going to work tomorrow.
__________________
2024 F150 XLT
b2tf is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 07:07 PM   #26
Stav
Smile
 
Stav's Avatar
 
Join Date: Dec 2004
Location: Merrylands Sydney
Posts: 8,541
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always ready to help others over the years on AFF with advice and tips along the way 
Default

No worries mate. If it comes loose and squeaks loctite the bolt. Glad I could help
__________________
Stingray Car Security ph 0414445444

Single din radio fascias for fg to fgx fords Australia wide .

FG 1 2 and 3 gauge holder in stock now! https://stingraycar.com.au/shop/
Site Sponsor See Sponsor Stingray Car Security 😍👌✌

AU wagon 6 14.241@96.75 1/4 mile sold.Octane fg xr6 turbo!! 12.312 112.21 mph home tune f6 injectors gone ..now in nitro fgxr6t ready to go again
Stav is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 08:19 PM   #27
sneaky
FF.Com.Au Hardcore
 
sneaky's Avatar
 
Join Date: Aug 2006
Location: Newcastle
Posts: 1,061
Default

have the same problem with my car, but it's not low or stiff or hard driven...

i have found a quick fix for when it really annoys me, the handy moist towelette (spelling?) from KFC. just jam said moist wipe (still in the packet) between the 2 panels and walla no noise (for a little while)

-tim

who will spend some spare time fixing problem properly now that i know how..
sneaky is offline   Reply With Quote Multi-Quote with this Post
Old 18-08-2008, 08:38 PM   #28
NC1183
FF.Com.Au Hardcore
 
NC1183's Avatar
 
Join Date: Apr 2005
Location: Moree, NSW
Posts: 2,076
Default

Quote:
Originally Posted by XRLNT-8
I have a great fix for the rattly centre air vents if anyone is interested.
Yeah i've very interested, mine drive me insane.
__________________
Nathan

2005 FPV BF Super Pursuit

The new toy (now sold)
The SP


The old ute (sold)
www.aufalcon.com/nc1183

Build Thread


Quote:
Originally Posted by F6T
If you look closely you can see the remains of a Hyundai excel that’s been sucked into the intake.
about the pic of 'CHOP YA' F6
NC1183 is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 01:42 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL