|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
14-09-2008, 09:30 AM
|
#1 | ||
|
Sly like a G6
Join Date: Jun 2006
Location: Hunter Valley Whine Country
Posts: 1,808
|
Does anyone know what variety of plastic the AU factory intake tubing is made of? I'll be making some mods to the throttle body end piece soon which will need some plastic welding done. I have the heat gun and need to get the plastic rods to suit the plastic. There are 2 types of rod, one suits ABS and the other is for PVC.
So, which is the intake tube - PVC or ABS?
__________________
The Frankenfalcon... AU1.5 Wagon, BA brakes, AU2 booster, BA2 XR6T engine, stock from airbox to turbo, 8psi/98 octane tune 240RWKW, BF XR6T cat, quiet 3" zorst, Pex BSO660 & BSO439 mufflers, 84 db, built BTR box, 3.08 LSD, Emer SVI LPG, AU1 XR8 alloys, Momo wheel, JVC KDR746BT head unit, Aerpro steering wheel control wiring. Sleeper, anyone? |
||
|
|
|
14-09-2008, 10:24 AM
|
#2 | ||
|
FF.Com.Au Hardcore
 
Join Date: Nov 2007
Location: Riff
Posts: 12,405
|
Definetly ABS. Dont know of anything made of pvc on car.
__________________
FGII XR6 IN LIGHTNING STRIKE R52 SIII IN GUN METALLIC |
||
|
|
|
14-09-2008, 10:33 AM
|
#3 | ||
|
Afterburner + skids =
 
Join Date: Dec 2004
Location: Skidsville
Posts: 12,141
|
Yep ABS for sure.
__________________
Speed Kills. So buy an AU XR8 and live forever. Oo\===/oO |
||
|
|
|
|
14-09-2008, 11:47 AM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
when i did the same thing i got another intake pipe and cut strips off using that for filler rods
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
|
|
|
|
14-09-2008, 02:20 PM
|
#5 | ||
|
Sly like a G6
Join Date: Jun 2006
Location: Hunter Valley Whine Country
Posts: 1,808
|
Now that sounds like a good idea. I've got a spare too... due to the way it was drilled to fit the LPG originally, it split through the sealing ring and is in unuseable condition.
My first thought was ABS, but then I started to wonder, I see a lot of poly (PVC) black water pipe.
__________________
The Frankenfalcon... AU1.5 Wagon, BA brakes, AU2 booster, BA2 XR6T engine, stock from airbox to turbo, 8psi/98 octane tune 240RWKW, BF XR6T cat, quiet 3" zorst, Pex BSO660 & BSO439 mufflers, 84 db, built BTR box, 3.08 LSD, Emer SVI LPG, AU1 XR8 alloys, Momo wheel, JVC KDR746BT head unit, Aerpro steering wheel control wiring. Sleeper, anyone? |
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Which Plastic?
Linear Mode
