|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
02-07-2009, 03:54 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Nov 2008
Location: Melbourne, Vic
Posts: 1,121
|
Hi there guys just wondering if someone can help me out.
Trying to remove a manual pedal box out of a ute. Can't get the brake pedal arm seperated to be able to manipulate the pedal box around and out over the brake master cylinder arm thingy. Thanks in advance for any help.
__________________
AU III Forte wagon - V8, 5spd man, lowered, 18" Honeycombs, Stock diff rebuilt with TruTrac LSD, Leather Ghia interior/dash, custom twin 2.5" into single 3" exhaust. Wagon Build AU I Forte Sedan - No longer
Toy Car Build |
||
02-07-2009, 03:56 PM | #2 | ||
Flairs - Truckers Delight
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
|
taken off the brake light switch and such?
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon" |
||
02-07-2009, 09:26 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Nov 2008
Location: Melbourne, Vic
Posts: 1,121
|
yep brake light switch and clutch cable and connection from brake pedal to the booster.
oh and the switch connected to the clutch pedal. Just can't get the box out and thinking i need to get the brake pedal arm off the box assembly. I have removed the clip connceting this arm but can't work out why i can't dissconect this arm it is still locked in place somehow.
__________________
AU III Forte wagon - V8, 5spd man, lowered, 18" Honeycombs, Stock diff rebuilt with TruTrac LSD, Leather Ghia interior/dash, custom twin 2.5" into single 3" exhaust. Wagon Build AU I Forte Sedan - No longer
Toy Car Build |
||
02-07-2009, 10:23 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Melbourne
Posts: 2,256
|
You have to take the clips off the shaft at the sides of the pedal box, then you need to push the shaft from the pass side end (from left to right) so it clears the pedal box and then you pull it out from underneath, (from right to left) the shaft doesnt push all the way through, you must go one way then pull it out of the other end.
|
||
02-07-2009, 11:28 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Nov 2008
Location: Melbourne, Vic
Posts: 1,121
|
Thanks for that i will give it a crack tomorrow.
__________________
AU III Forte wagon - V8, 5spd man, lowered, 18" Honeycombs, Stock diff rebuilt with TruTrac LSD, Leather Ghia interior/dash, custom twin 2.5" into single 3" exhaust. Wagon Build AU I Forte Sedan - No longer
Toy Car Build |
||
Thread Tools | |
Display Modes | |
|