|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
29-07-2009, 06:24 AM | #1 | ||
Starter Motor
Join Date: Jul 2009
Posts: 1
|
can anyone tell me how to remove a factory fitted 6 stacker cd from the dash of a au ute, thanks. having all sorts trouble
|
||
29-07-2009, 07:45 AM | #2 | ||
FF.Com.Au Hardcore
Join Date: May 2009
Location: Victoria
Posts: 836
|
This would be better poster in the AUfalcon.com section.
But im pretty sure you need these 2 U shaped tools which you shove into the holes on either side of the player. You can make them out of a coat hanger. |
||
29-07-2009, 08:08 AM | #3 | ||
The one and only
Join Date: Dec 2004
Location: Carrum Downs, Victoria
Posts: 9,053
|
I think, 4 pins into dash, two on each side of stereo then pull.
__________________
1992 DC LTDHO 360rwkw built by me Tuned by CVE Performance Going of the rails on a crazy train Other cars include Dynamic ED Sprint, Dynamic DL LTD, Sparkling Burgundy DL LTD, Yellow, Red & Blue XB sedan & Black XB Coupe
|
||
29-07-2009, 08:27 AM | #4 | ||||
Force Fed Fords
Join Date: Aug 2005
Location: Enroute
Posts: 4,050
|
Quote:
These pins have a little notch taken outside of the inside edge to help grab the unit. The pin diameter is around 3mm to 3.5mm if I remember correctly. Try asking your ford dealer if he'd let you borrow them on his site, or spend ten bucks and have them remove it for you.
__________________
If brains were gasoline, you wouldn't have enough to power an ants go-cart a half a lap around a Cheerio - Ron Shirley Quote:
|
||||
29-07-2009, 01:05 PM | #5 | ||
Winter all year round
Join Date: Jan 2005
Location: Sydney
Posts: 671
|
You can make you own tools as well.
You need stiff wire the same diameter as the four holes in deck. Now bend the wire into a U shape, the two legs are about 100mm long, and legs need to be the same distance apart as the holes in the deck are. Once you've made two of these tools, slide them into the holes until you feel some resistance (you've reached the locking tabs) then push a little firmer to slide the wire past the tabs (this will spread the tabs, unlocking them). Now the fun part, grab the right side tool and pull it to the right, and pull the left side tool to the left. So what you are doing is pulling the tools away from each other. If you've get someone to give you a hand get them to pull the deck out at the same time. Or if doing it solo, keep sidewards pressure on the tools and pull at the same time in a wiggling motion. I've done it many a time on my own this way and it worked. Hope that helps.
__________________
Some people drive sports cars on the weekend....I drive my AU! It's not what you drive...it's how you enjoy it. Recommend trading with Mechan1k, Offyaguts, EDMONTY, PhantomXR8, HOTC2R, Partie & JC |
||
29-07-2009, 09:41 PM | #6 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: ACT
Posts: 4,028
|
or you can buy the tools on ebay:
Linky to ebay ad |
||
Thread Tools | |
Display Modes | |
|