|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
22-07-2009, 04:21 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Posts: 1,042
|
Hi Guys,
I've just started having problems in the last few days with the XR6 not idling well. On a cold start it idles like a dream, but once it's been warmed up the idle is all over the place from 600RPM to 1000RPM and anywhere inbetween. It will sometimes hold at 800, blip up and down e.t.c I've reset the ECU and disconnected/reconnected the connector for the ISC and it's not helped. I have cleaned out the ISC and TB about 3 or so months ago so I don't think it's all cruddy again yet. When it blips it's idle, you can hear the intake noise (like when you turn the steering wheel when stopped). You can also feel the car poke forward while cruising at speed as well (as if the cruise control is blipping the throttle). Any ideas? Or best to take it into a mechanics? |
||
26-07-2009, 04:45 PM | #2 | ||
Starter Motor
Join Date: Jul 2009
Posts: 1
|
my cousins au2 has exactly the same problem, the idle really hunts when u are parked and turn the steering wheel and u can hear a sucking noise at the throttle body intake when u turn the wheel. any ideas. and it didnt do it until he just replaced the battery.
|
||
27-07-2009, 10:35 AM | #3 | ||
Miami Pilot
Join Date: Jan 2005
Location: ACT
Posts: 21,703
|
Could be a vacuum leak in the intake somewhere - try intake manifold bolts and PCV as starting points. Have you replaced the ISC? If you've cleaned it and that hasn't helped, then it could need a new one. There's not much that controls idle apart from having a sealed intake system (no leaks), and a working ISC valve.
__________________
-----------------------------------------------------------------
The Hammer: FG GTE | 376rwkw | 1/4 mile 11.793 @ 119.75mph 1.733 60' (4408lb) 1 of 60 FG MK1 335 GTEs (1 of 118 FG Mk 1 & 2 335 GTEs). Mods: Tune, HSD/ShockWorks, black GT335 19” staggered replicas with 245 & 275/35/19 Michelin Pilot sport 5s Daily: BF2 Fairmont Ghia I6 ZF, machine face GT335 19” staggered Replicas with 245s and 275s, Bilsteins & Kings FPV 335 build stats: <click here> Ford Performance Club ACT |
||
30-07-2009, 07:45 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Posts: 1,042
|
Yeah I haven't really checked bolts on the intake side of things, might give that a go tommorow. I've got a feeling it could be the ISC though, the spring mechanism inside looks a bit thrashed.
Don't suppose anybody has a photo of a relatively good-condition ISC? (The valve/spring section). |
||
Thread Tools | |
Display Modes | |
|